Academic Experts in Materials Science

Analytical Biochemistry / Feb 01, 2012

Hu, C., Nikolic, D., Eggler, A. L., Mesecar, A. D., & van Breemen, R. B. (2012). Screening for natural chemoprevention agents that modify human Keap1. Analytical Biochemistry, 421(1), 108–114. https://doi.org/10.1016/j.ab.2011.10.028

Biochemical and Biophysical Research Communications / Oct 01, 2010

Small, E., Eggler, A., & Mesecar, A. D. (2010). Development of an efficient E. coli expression and purification system for a catalytically active, human Cullin3–RINGBox1 protein complex and elucidation of its quaternary structure with Keap1. Biochemical and Biophysical Research Communications, 400(4), 471–475. https://doi.org/10.1016/j.bbrc.2010.08.062

Archives of Biochemistry and Biophysics / Nov 01, 2008

McAdams, K., Casper, E. S., Matthew Haas, R., Santarsiero, B. D., Eggler, A. L., Mesecar, A., & Halkides, C. J. (2008). The structures of T87I phosphono-CheY and T87I/Y106W phosphono-CheY help to explain their binding affinities to the FliM and CheZ peptides. Archives of Biochemistry and Biophysics, 479(2), 105–113. https://doi.org/10.1016/j.abb.2008.08.019

Journal of the American Society for Mass Spectrometry / Dec 01, 2007

Luo, Y., Eggler, A. L., Liu, D., Liu, G., Mesecar, A. D., & van Breemen, R. B. (2007). Sites of alkylation of human Keap1 by natural chemoprevention agents. Journal of the American Society for Mass Spectrometry, 18(12), 2226–2232. https://doi.org/10.1016/j.jasms.2007.09.015

Biochimica et Biophysica Acta (BBA) - Bioenergetics / Sep 01, 2016

Kish, E., Wang, K., Llansola-Portoles, M. J., Ilioaia, C., Pascal, A. A., Robert, B., & Yang, C. (2016). Probing the pigment binding sites in LHCII with resonance Raman spectroscopy: The effect of mutations at S123. Biochimica et Biophysica Acta (BBA) - Bioenergetics, 1857(9), 1490–1496. https://doi.org/10.1016/j.bbabio.2016.06.001

Journal of Molecular Structure / Jun 01, 2015

Mezzetti, A., Kish, E., Robert, B., & Spezia, R. (2015). Assignment of IR bands of isolated and protein-bound Peridinin in its fundamental and triplet state by static FTIR, time-resolved step-scan FTIR and DFT calculations. Journal of Molecular Structure, 1090, 58–64. https://doi.org/10.1016/j.molstruc.2014.11.054

Journal of Building Engineering / Jul 01, 2022

Degtyarev, V. V., & Tsavdaridis, K. D. (2022). Buckling and ultimate load prediction models for perforated steel beams using machine learning algorithms. Journal of Building Engineering, 51, 104316. https://doi.org/10.1016/j.jobe.2022.104316

Journal of Building Engineering / Jun 01, 2022

Corfar, D.-A., & Tsavdaridis, K. D. (2022). A comprehensive review and classification of inter-module connections for hot-rolled steel modular building systems. Journal of Building Engineering, 50, 104006. https://doi.org/10.1016/j.jobe.2022.104006

Journal of Constructional Steel Research / Mar 01, 2022

Thirunavukkarasu, K., Kanthasamy, E., Poologanathan, K., Tsavdaridis, K. D., Gatheeshgar, P., Hareindirasarma, S., & McIntosh, A. (2022). Shear performance of SupaCee sections with openings: Numerical studies. Journal of Constructional Steel Research, 190, 107142. https://doi.org/10.1016/j.jcsr.2022.107142

Journal of Building Engineering / Nov 01, 2021

Zeytinci, B. M., Şahin, M., Güler, M. A., & Tsavdaridis, K. D. (2021). A practical design formulation for perforated beams with openings strengthened with ring type stiffeners subject to Vierendeel actions. Journal of Building Engineering, 43, 102915. https://doi.org/10.1016/j.jobe.2021.102915

Journal of Building Engineering / Oct 01, 2021

Iacovidou, E., Purnell, P., Tsavdaridis, K. D., & Poologanathan, K. (2021). Digitally enabled modular construction for promoting modular components reuse: A UK view. Journal of Building Engineering, 42, 102820. https://doi.org/10.1016/j.jobe.2021.102820

Journal of Constructional Steel Research / Aug 01, 2021

Tsavdaridis, K. D., Lau, C. K., & Alonso-Rodríguez, A. (2021). Experimental behaviour of non-seismical RWS connections with perforated beams under cyclic actions. Journal of Constructional Steel Research, 183, 106756. https://doi.org/10.1016/j.jcsr.2021.106756

Journal of Building Engineering / Jun 01, 2021

Alam, N., Maraveas, C., Tsavdaridis, K. D., & Nadjai, A. (2021). Performance of Ultra Shallow Floor Beams (USFB) exposed to standard and natural fires. Journal of Building Engineering, 38, 102192. https://doi.org/10.1016/j.jobe.2021.102192

Construction and Building Materials / May 01, 2021

Cai, G., Tsavdaridis, K. D., Si Larbi, A., & Purnell, P. (2021). A simplified design approach for predicting the flexural behavior of TRM-strengthened RC beams under cyclic loads. Construction and Building Materials, 285, 122799. https://doi.org/10.1016/j.conbuildmat.2021.122799

Composite Structures / Apr 01, 2021

Ferreira, F. P. V., Tsavdaridis, K. D., Martins, C. H., & De Nardin, S. (2021). Buckling and post-buckling analyses of composite cellular beams. Composite Structures, 262, 113616. https://doi.org/10.1016/j.compstruct.2021.113616

Steel Construction / Dec 07, 2020

Rajana, K., Alonso‐Rodríguez, A., & Tsavdaridis, K. D. (2020). A wavelet‐based approach for describing the mechanical behaviour of cellular beams. Steel Construction, 14(1), 47–54. Portico. https://doi.org/10.1002/stco.202000043

Journal of Building Engineering / Feb 01, 2021

Liu, F., Feng, R., & Tsavdaridis, K. D. (2021). A novel progressive grid generation method for free-form grid structure design and case studies. Journal of Building Engineering, 34, 101866. https://doi.org/10.1016/j.jobe.2020.101866

Journal of Constructional Steel Research / Jan 01, 2021

Dissanayake, D. M. M. P., Zhou, C., Poologanathan, K., Gunalan, S., Tsavdaridis, K. D., & Guss, J. (2021). Numerical simulation and design of stainless steel hollow flange beams under shear. Journal of Constructional Steel Research, 176, 106414. https://doi.org/10.1016/j.jcsr.2020.106414

Journal of Building Engineering / Nov 01, 2020

Gatheeshgar, P., Poologanathan, K., Gunalan, S., Tsavdaridis, K. D., Nagaratnam, B., & Iacovidou, E. (2020). Optimised cold-formed steel beams in modular building applications. Journal of Building Engineering, 32, 101607. https://doi.org/10.1016/j.jobe.2020.101607

Steel Construction / Feb 25, 2020

Gatheeshgar, P., Poologanathan, K., Gunalan, S., Nagaratnam, B., Tsavdaridis, K. D., & Ye, J. (2020). Structural behaviour of optimized cold‐formed steel beams. Steel Construction, 13(4), 294–304. Portico. https://doi.org/10.1002/stco.201900024

Journal of Constructional Steel Research / Jun 01, 2020

Ahmed, I. M., & Tsavdaridis, K. D. (2020). Shear connection of prefabricated slabs with LWC - Part1: Experimental and analytical studies. Journal of Constructional Steel Research, 169, 106016. https://doi.org/10.1016/j.jcsr.2020.106016

Journal of Constructional Steel Research / May 01, 2020

Degtyareva, N., Gatheeshgar, P., Poologanathan, K., Gunalan, S., Tsavdaridis, K. D., & Napper, S. (2020). New distortional buckling design rules for slotted perforated cold-formed steel beams. Journal of Constructional Steel Research, 168, 106006. https://doi.org/10.1016/j.jcsr.2020.106006

Journal of Constructional Steel Research / May 01, 2020

Dissanayake, D. M. M. P., Poologanathan, K., Gunalan, S., Tsavdaridis, K. D., Nagaratnam, B., & Wanniarachchi, K. S. (2020). Numerical modelling and shear design rules of stainless steel lipped channel sections. Journal of Constructional Steel Research, 168, 105873. https://doi.org/10.1016/j.jcsr.2019.105873

Journal of Constructional Steel Research / Oct 01, 2019

Boushehri, K., Tsavdaridis, K. D., & Cai, G. (2019). Seismic behaviour of RWS moment connections to deep columns with European sections. Journal of Constructional Steel Research, 161, 416–435. https://doi.org/10.1016/j.jcsr.2019.07.009

Journal of Structural Engineering / Sep 01, 2019

Wang, Y., Cai, G., Li, Y., Waldmann, D., Si Larbi, A., & Tsavdaridis, K. D. (2019). Behavior of Circular Fiber-Reinforced Polymer–Steel-Confined Concrete Columns Subjected to Reversed Cyclic Loads: Experimental Studies and Finite-Element Analysis. Journal of Structural Engineering, 145(9). https://doi.org/10.1061/(asce)st.1943-541x.0002373

Journal of Structural Fire Engineering / Jun 10, 2019

Alam, N., Nadjai, A., Maraveas, C., Tsarvdaridis, K., & Kahanji, C. (2019). Effect of air-gap on response of fabricated slim floor beams in fire. Journal of Structural Fire Engineering, 10(2), 155–174. https://doi.org/10.1108/jsfe-04-2018-0011

Journal of Constructional Steel Research / Apr 01, 2019

Ahmed, I. M., & Tsavdaridis, K. D. (2019). The evolution of composite flooring systems: applications, testing, modelling and eurocode design approaches. Journal of Constructional Steel Research, 155, 286–300. https://doi.org/10.1016/j.jcsr.2019.01.007

Journal of Constructional Steel Research / Feb 01, 2019

Stephen, D., Lam, D., Forth, J., Ye, J., & Tsavdaridis, K. D. (2019). An evaluation of modelling approaches and column removal time on progressive collapse of building. Journal of Constructional Steel Research, 153, 243–253. https://doi.org/10.1016/j.jcsr.2018.07.019

Journal of Building Engineering / May 01, 2019

Maraveas, C., & Tsavdaridis, K. D. (2019). Assessment and retrofitting of an existing steel structure subjected to wind-induced failure analysis. Journal of Building Engineering, 23, 53–67. https://doi.org/10.1016/j.jobe.2019.01.005

Journal of Structural Engineering / Sep 01, 2018

Shaheen, M. A., Tsavdaridis, K. D., & Yamada, S. (2018). Comprehensive FE Study of the Hysteretic Behavior of Steel–Concrete Composite and Noncomposite RWS Beam-to-Column Connections. Journal of Structural Engineering, 144(9). https://doi.org/10.1061/(asce)st.1943-541x.0002124

Journal of Building Engineering / Nov 01, 2018

Ahmed, I. M., & Tsavdaridis, K. D. (2018). Life cycle assessment (LCA) and cost (LCC) studies of lightweight composite flooring systems. Journal of Building Engineering, 20, 624–633. https://doi.org/10.1016/j.jobe.2018.09.013

Polymers / Aug 30, 2017

Zhao, J., Cai, G., Cui, L., Si Larbi, A., & Daniel Tsavdaridis, K. (2017). Deterioration of Basic Properties of the Materials in FRP-Strengthening RC Structures under Ultraviolet Exposure. Polymers, 9(12), 402. https://doi.org/10.3390/polym9090402

Fire Technology / Mar 23, 2016

Maraveas, C., Tsavdaridis, K. D., & Nadjai, A. (2016). Fire Resistance of Unprotected Ultra Shallow Floor Beams (USFB): A Numerical Investigation. Fire Technology, 53(2), 609–627. https://doi.org/10.1007/s10694-016-0583-5

Journal of Structural Fire Engineering / Jun 12, 2017

Maraveas, C., Fasoulakis, Z., & Tsavdaridis, K. D. (2017). Post-fire assessment and reinstatement of steel structures. Journal of Structural Fire Engineering, 8(2), 181–201. https://doi.org/10.1108/jsfe-03-2017-0028

Journal of Constructional Steel Research / Jan 01, 2016

Tsavdaridis, K. D., & Papadopoulos, T. (2016). A FE parametric study of RWS beam-to-column bolted connections with cellular beams. Journal of Constructional Steel Research, 116, 92–113. https://doi.org/10.1016/j.jcsr.2015.08.046

Key Engineering Materials / Sep 01, 2016

Grekavicius, L., Hughes, J. A., Tsavdaridis, K. D., & Efthymiou, E. (2016). Novel Morphologies of Aluminium Cross-Sections through Structural Topology Optimization Techniques. Key Engineering Materials, 710, 321–326. https://doi.org/10.4028/www.scientific.net/kem.710.321

Computers & Structures / Oct 01, 2015

Tsavdaridis, K. D., Kingman, J. J., & Toropov, V. V. (2015). Application of structural topology optimisation to perforated steel beams. Computers & Structures, 158, 108–123. https://doi.org/10.1016/j.compstruc.2015.05.004

Magazine of Concrete Research / Feb 01, 2015

Tadepalli, P. R., Dhonde, H. B., Mo, Y. L., Hsu, T. T. C., & Martí-Vargas, J. R. (2015). Discussion: Shear behaviour of prestressed steel fibre concrete box-beams. Magazine of Concrete Research, 67(4), 215–216. https://doi.org/10.1680/macr.14.00257

Magazine of Concrete Research / Feb 01, 2015

Aghaee, K., Yazdi, M. A., & Tsavdaridis, K. D. (2015). Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires. Magazine of Concrete Research, 67(4), 197–205. https://doi.org/10.1680/macr.14.00232

Journal of Constructional Steel Research / Sep 01, 2012

Tsavdaridis, K. D., & D’Mello, C. (2012). Optimisation of novel elliptically-based web opening shapes of perforated steel beams. Journal of Constructional Steel Research, 76, 39–53. https://doi.org/10.1016/j.jcsr.2012.03.026

Journal of Structural Engineering / Oct 01, 2012

Tsavdaridis, K. D., & D’Mello, C. (2012). Vierendeel Bending Study of Perforated Steel Beams with Various Novel Web Opening Shapes through Nonlinear Finite-Element Analyses. Journal of Structural Engineering, 138(10), 1214–1230. https://doi.org/10.1061/(asce)st.1943-541x.0000562

Journal of Constructional Steel Research / Oct 01, 2011

Tsavdaridis, K. D., & D’Mello, C. (2011). Web buckling study of the behaviour and strength of perforated steel beams with different novel web opening shapes. Journal of Constructional Steel Research, 67(10), 1605–1620. https://doi.org/10.1016/j.jcsr.2011.04.004

Mechanics Based Design of Structures and Machines / Feb 05, 2021

Alonso-Rodríguez, A., & Tsavdaridis, K. D. (2021). Effect of rotational inertia on building response to earthquakes via a closed-form solution. Mechanics Based Design of Structures and Machines, 1–14. https://doi.org/10.1080/15397734.2021.1880329

Materials Science and Engineering: C / May 01, 2011

Lee, S., Novitskaya, E. E., Reynante, B., Vasquez, J., Urbaniak, R., Takahashi, T., Woolley, E., Tombolato, L., Chen, P.-Y., & McKittrick, J. (2011). Impact testing of structural biological materials. Materials Science and Engineering: C, 31(4), 730–739. https://doi.org/10.1016/j.msec.2010.10.017

Polymer Degradation and Stability / Sep 01, 2010

Stark, N. M., White, R. H., Mueller, S. A., & Osswald, T. A. (2010). Evaluation of various fire retardants for use in wood flour–polyethylene composites. Polymer Degradation and Stability, 95(9), 1903–1910. https://doi.org/10.1016/j.polymdegradstab.2010.04.014

Additive Manufacturing / Aug 01, 2018

Osswald, T. A., Puentes, J., & Kattinger, J. (2018). Fused filament fabrication melting model. Additive Manufacturing, 22, 51–59. https://doi.org/10.1016/j.addma.2018.04.030

Polymer Engineering & Science / Jan 01, 2007

Lopez, L. M., Cosgrove, A. B., Hernandez-Ortiz, J. P., & Osswald, T. A. (2007). Modeling the vulcanization reaction of silicone rubber. Polymer Engineering & Science, 47(5), 675–683. https://doi.org/10.1002/pen.20698

International Polymer Processing / May 01, 1990

Osswald, T. A., & Tucker, C. L. (1990). Compression Mold Filling Simulation for Non-Planar Parts. International Polymer Processing, 5(2), 79–87. https://doi.org/10.3139/217.900079

Composites Part A: Applied Science and Manufacturing / Nov 01, 2016

Ropers, S., Kardos, M., & Osswald, T. A. (2016). A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites. Composites Part A: Applied Science and Manufacturing, 90, 22–32. https://doi.org/10.1016/j.compositesa.2016.06.016

Polymer Engineering and Science / Apr 01, 1988

Osswald, T. A., & Tucker, C. L. (1988). A boundary element simulation of compression mold filling. Polymer Engineering and Science, 28(7), 413–420. https://doi.org/10.1002/pen.760280703

Journal of Polymers and the Environment / May 28, 2008

Ralston, B. E., & Osswald, T. A. (2008). Viscosity of Soy Protein Plastics Determined by Screw-Driven Capillary Rheometry. Journal of Polymers and the Environment, 16(3), 169–176. https://doi.org/10.1007/s10924-008-0098-3

International Polymer Processing / Mar 01, 1999

Rauwendaal, C., Osswald, T., Gramann, P., & Davis, B. (1999). Design of Dispersive Mixing Devices. International Polymer Processing, 14(1), 28–34. https://doi.org/10.3139/217.1524

Additive Manufacturing / Oct 01, 2018

Beran, T., Mulholland, T., Henning, F., Rudolph, N., & Osswald, T. A. (2018). Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers. Additive Manufacturing, 23, 206–214. https://doi.org/10.1016/j.addma.2018.08.009

Polymer Composites / Oct 01, 1999

Theriault, R. P., Osswald, T. A., & Castro, J. M. (1999). A numerical model of the viscosity of an epoxy prepreg resin system. Polymer Composites, 20(5), 628–633. https://doi.org/10.1002/pc.10385

Polymers for Advanced Technologies / May 22, 2019

Zhang, X., Chen, L., Mulholland, T., & Osswald, T. A. (2019). Effects of raster angle on the mechanical properties of PLA and Al/PLA composite part produced by fused deposition modeling. Polymers for Advanced Technologies, 30(8), 2122–2135. Portico. https://doi.org/10.1002/pat.4645

Journal of Biomedical Materials Research Part A / Dec 29, 2015

Cifuentes, S. C., Bensiamar, F., Gallardo-Moreno, A. M., Osswald, T. A., González-Carrasco, J. L., Benavente, R., González-Martín, M. L., García-Rey, E., Vilaboa, N., & Saldaña, L. (2015). Incorporation of Mg particles into PDLLA regulates mesenchymal stem cell and macrophage responses. Journal of Biomedical Materials Research Part A, 104(4), 866–878. Portico. https://doi.org/10.1002/jbm.a.35625

Journal of Reinforced Plastics and Composites / Aug 01, 1994

Tseng, S.-C., & Osswald, T. A. (1994). Prediction of Shrinkage and Warpage of Fiber Reinforced Thermoset Composite Parts. Journal of Reinforced Plastics and Composites, 13(8), 698–721. https://doi.org/10.1177/073168449401300803

Additive Manufacturing / Oct 01, 2016

Mazhar, H., Osswald, T., & Negrut, D. (2016). On the use of computational multi-body dynamics analysis in SLS-based 3D printing. Additive Manufacturing, 12, 291–295. https://doi.org/10.1016/j.addma.2016.05.012

Polymer Engineering & Science / Jul 01, 1998

Davis, B. A., Gramann, P. J., Noriega E., M. D. P., & Osswald, T. A. (1998). Grooved feed single screw extruders?improving productivity and reducing viscous heating effects. Polymer Engineering & Science, 38(7), 1199–1204. https://doi.org/10.1002/pen.10288

Journal of Composites Science / Aug 02, 2018

Mulholland, T., Goris, S., Boxleitner, J., Osswald, T., & Rudolph, N. (2018). Process-Induced Fiber Orientation in Fused Filament Fabrication. Journal of Composites Science, 2(3), 45. https://doi.org/10.3390/jcs2030045

Polymer Composites / Apr 01, 1988

Barone, M. R., & Osswald, T. A. (1988). A boundary element analysis of flow in sheet molding compound. Polymer Composites, 9(2), 158–164. https://doi.org/10.1002/pc.750090210

SN Applied Sciences / May 21, 2019

Zhang, X., Chen, L., Mulholland, T., & Osswald, T. A. (2019). Characterization of mechanical properties and fracture mode of PLA and copper/PLA composite part manufactured by fused deposition modeling. SN Applied Sciences, 1(6). https://doi.org/10.1007/s42452-019-0639-5

International Polymer Processing / Dec 01, 1998

Rauwendaal, C., Osswald, T. A., Tellez, G., & Gramann, P. J. (1998). Flow Analysis in Screw Extruders-Effect of Kinematic Conditions. International Polymer Processing, 13(4), 327–333. https://doi.org/10.3139/217.980327

Polymer Composites / Apr 01, 2020

Chen, L., Zhang, X., Wang, Y., & Osswald, T. A. (2020). Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties. Polymer Composites, 41(4), 1356–1368. Portico. https://doi.org/10.1002/pc.25459

Polymer Composites / Jun 22, 2017

Goris, S., Back, T., Yanev, A., Brands, D., Drummer, D., & Osswald, T. A. (2017). A novel fiber length measurement technique for discontinuous fiber‐reinforced composites: A comparative study with existing methods. Polymer Composites, 39(11), 4058–4070. Portico. https://doi.org/10.1002/pc.24466

Additive Manufacturing / May 01, 2018

Obst, P., Launhardt, M., Drummer, D., Osswald, P. V., & Osswald, T. A. (2018). Failure criterion for PA12 SLS additive manufactured parts. Additive Manufacturing, 21, 619–627. https://doi.org/10.1016/j.addma.2018.04.008

Plastics Engineering / Feb 01, 2008

Ralston, B. E., & Osswald, T. A. (2008). The History of Tomorrow’s Materials: Protein-Based Biopolymers. Plastics Engineering, 64(2), 36–40. Portico. https://doi.org/10.1002/j.1941-9635.2008.tb00292.x

Polymer Engineering & Science / Mar 01, 1997

Buchmann, M., Theriault, R., & Osswald, T. A. (1997). Polymer flow length simulation during injection mold filling. Polymer Engineering & Science, 37(3), 667–671. https://doi.org/10.1002/pen.11710

Wear / Mar 01, 2010

Feulner, R., Brocka, Z., Seefried, A., Kobes, M. O., Hülder, G., & Osswald, T. A. (2010). The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact. Wear, 268(7–8), 905–910. https://doi.org/10.1016/j.wear.2009.12.025

Composites Part A: Applied Science and Manufacturing / Apr 01, 2017

Albrecht, K., Baur, E., Endres, H.-J., Gente, R., Graupner, N., Koch, M., Neudecker, M., Osswald, T., Schmidtke, P., Wartzack, S., Webelhaus, K., & Müssig, J. (2017). Measuring fibre orientation in sisal fibre-reinforced, injection moulded polypropylene – Pros and cons of the experimental methods to validate injection moulding simulation. Composites Part A: Applied Science and Manufacturing, 95, 54–64. https://doi.org/10.1016/j.compositesa.2016.12.022

Journal of Polymer Engineering / Jan 01, 2005

Hernandez-Ortiz, J. P., & Osswald, T. A. (2005). A Novel Cure Reaction Model Fitting Technique Based on DSC Scans. Journal of Polymer Engineering, 25(1). https://doi.org/10.1515/polyeng.2005.25.1.23

Journal of Non-Newtonian Fluid Mechanics / Jan 01, 1987

Barone, M. R., & Osswald, T. A. (1987). Boundary integral equations for analyzing the flow of a chopped fiber reinforced polymer compound in compression molding. Journal of Non-Newtonian Fluid Mechanics, 26(2), 185–206. https://doi.org/10.1016/0377-0257(87)80004-6

Advances in Polymer Technology / Jan 01, 1998

Rios, A. C., Gramann, P. J., & Osswald, T. A. (1998). Comparative study of mixing in corotating twin screw extruders using computer simulation. Advances in Polymer Technology, 17(2), 107–113. https://doi.org/10.1002/(sici)1098-2329(199822)17:2<107::aid-adv2>3.0.co;2-x

Journal of Applied Polymer Science / Aug 24, 2010

Hernández-Ortiz, J. P., & Osswald, T. A. (2010). Modeling processing of silicone rubber: Liquid versus hard silicone rubbers. Journal of Applied Polymer Science, 119(3), 1864–1871. https://doi.org/10.1002/app.31995

Additive Manufacturing / Aug 01, 2019

Mazzei Capote, G. A., Rudolph, N. M., Osswald, P. V., & Osswald, T. A. (2019). Failure surface development for ABS fused filament fabrication parts. Additive Manufacturing, 28, 169–175. https://doi.org/10.1016/j.addma.2019.05.005

Polymer Composites / Jun 01, 1999

Theriault, R. P., Osswald, T. A., & Castro, J. M. (1999). Processing induced residual stress in asymmetric laminate panels. Polymer Composites, 20(3), 493–509. https://doi.org/10.1002/pc.10373

Polymer Composites / Aug 01, 1994

Tseng, S.-C., & Osswald, T. A. (1994). Predicting shrinkage and warpage of fiber-reinforced composite parts. Polymer Composites, 15(4), 270–277. https://doi.org/10.1002/pc.750150405

Polymer Composites / Jan 01, 2007

Londoño-Hurtado, A., Hernandez-Ortiz, J. P., & Osswald, T. A. (2007). Mechanism of fiber–matrix separation in ribbed compression molded parts. Polymer Composites, 28(4), 451–457. https://doi.org/10.1002/pc.20295

Composites Part A: Applied Science and Manufacturing / Feb 01, 2018

Goris, S., & Osswald, T. A. (2018). Process-induced fiber matrix separation in long fiber-reinforced thermoplastics. Composites Part A: Applied Science and Manufacturing, 105, 321–333. https://doi.org/10.1016/j.compositesa.2017.11.024

Additive Manufacturing / Mar 01, 2020

Obst, P., Riedelbauch, J., Oehlmann, P., Rietzel, D., Launhardt, M., Schmölzer, S., Osswald, T. A., & Witt, G. (2020). Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties. Additive Manufacturing, 32, 101002. https://doi.org/10.1016/j.addma.2019.101002

Journal of Composites Science / May 16, 2017

Kuhn, C., Walter, I., Taeger, O., & Osswald, T. (2017). Experimental and Numerical Analysis of Fiber Matrix Separation during Compression Molding of Long Fiber Reinforced Thermoplastics. Journal of Composites Science, 1(1), 2. https://doi.org/10.3390/jcs1010002

Acta Biomaterialia / Sep 01, 2019

McNulty, J. D., Marti-Figueroa, C., Seipel, F., Plantz, J. Z., Ellingham, T., Duddleston, L. J. L., Goris, S., Cox, B. L., Osswald, T. A., Turng, L.-S., & Ashton, R. S. (2019). Micro-injection molded, poly(vinyl alcohol)-calcium salt templates for precise customization of 3D hydrogel internal architecture. Acta Biomaterialia, 95, 258–268. https://doi.org/10.1016/j.actbio.2019.04.050

Composites Part A: Applied Science and Manufacturing / Nov 01, 2018

Song, Y., Gandhi, U., Sekito, T., Vaidya, U. K., Vallury, S., Yang, A., & Osswald, T. (2018). CAE method for compression molding of carbon fiber-reinforced thermoplastic composite using bulk materials. Composites Part A: Applied Science and Manufacturing, 114, 388–397. https://doi.org/10.1016/j.compositesa.2018.09.002

Journal of Composites Science / Dec 28, 2017

Kuhn, C., Walter, I., Täger, O., & Osswald, T. (2017). Simulative Prediction of Fiber-Matrix Separation in Rib Filling During Compression Molding Using a Direct Fiber Simulation. Journal of Composites Science, 2(1), 2. https://doi.org/10.3390/jcs2010002

Journal of Applied Polymer Science / Mar 10, 2014

Restrepo-Zapata, N. C., Osswald, T. A., & Hernández-Ortiz, J. P. (2014). Method for time-temperature-transformation diagrams using DSC data: Linseed aliphatic epoxy resin. Journal of Applied Polymer Science, 131(15), n/a-n/a. https://doi.org/10.1002/app.40566

Composite Interfaces / Jan 01, 2000

Sanadi, A. R., & Caulfield, D. F. (2000). Transcrystalline interphases in natural fiber-PP composites: effect of coupling agent. Composite Interfaces, 7(1), 31–43. https://doi.org/10.1163/156855400300183560

Additive Manufacturing / Mar 01, 2020

Redmann, A., Oehlmann, P., Scheffler, T., Kagermeier, L., & Osswald, T. A. (2020). Thermal curing kinetics optimization of epoxy resin in Digital Light Synthesis. Additive Manufacturing, 32, 101018. https://doi.org/10.1016/j.addma.2019.101018

Polymer Composites / Jan 05, 2017

Osswald, P. V., & Osswald, T. A. (2017). A strength tensor based failure criterion with stress interactions. Polymer Composites, 39(8), 2826–2834. Portico. https://doi.org/10.1002/pc.24275

International Polymer Processing / Jul 01, 2011

Rudolph, N. M., Osswald, T. A., & Ehrenstein, G. W. (2011). Influence of Pressure on Volume, Temperature and Crystallization of Thermoplastics during Polymer Processing. International Polymer Processing, 26(3), 239–248. https://doi.org/10.3139/217.2417

International Polymer Processing / Dec 01, 1992

Gramann, P. J., & Osswald, T. A. (1992). Simulating Polymer Mixing Processes Using the Boundary Element Method. International Polymer Processing, 7(4), 303–313. https://doi.org/10.3139/217.920303

Composites Part B: Engineering / Feb 01, 2020

Dahmen, V., Redmann, A. J., Austermann, J., Quintanilla, A. L., Mecham, S. J., & Osswald, T. A. (2020). Fabrication of hybrid composite T-joints by co-curing with 3D printed dual cure epoxy. Composites Part B: Engineering, 183, 107728. https://doi.org/10.1016/j.compositesb.2019.107728

Polymer Testing / Dec 01, 2019

Petzold, S., Klett, J., Schauer, A., & Osswald, T. A. (2019). Surface roughness of polyamide 12 parts manufactured using selective laser sintering. Polymer Testing, 80, 106094. https://doi.org/10.1016/j.polymertesting.2019.106094

Composites Part A: Applied Science and Manufacturing / Sep 01, 2017

Song, Y., Gandhi, U., Pérez, C., Osswald, T., Vallury, S., & Yang, A. (2017). Method to account for the fiber orientation of the initial charge on the fiber orientation of finished part in compression molding simulation. Composites Part A: Applied Science and Manufacturing, 100, 244–254. https://doi.org/10.1016/j.compositesa.2017.05.021

HTM Journal of Heat Treatment and Materials / Dec 01, 1994

Inhalt. (1994). HTM Journal of Heat Treatment and Materials, 49(6), 361–361. https://doi.org/10.1515/htm-1994-490601

Composites Part A: Applied Science and Manufacturing / May 01, 2017

Ropers, S., Sachs, U., Kardos, M., & Osswald, T. A. (2017). A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites – Part II. Composites Part A: Applied Science and Manufacturing, 96, 67–76. https://doi.org/10.1016/j.compositesa.2017.02.007

International Polymer Processing / Mar 01, 2000

Rios, A. C., Gramann, P. J., Osswald, T. A., Noriega, M. del P., & Estrada, O. A. (2000). Experimental and Numerical Study of Rhomboidal Mixing Sections. International Polymer Processing, 15(1), 12–19. https://doi.org/10.3139/217.1578

Composite Structures / Jul 01, 2020

Zhao, J., Su, D.-X., Yi, J., Cheng, G., Turng, L.-S., & Osswald, T. (2020). The effect of micromechanics models on mechanical property predictions for short fiber composites. Composite Structures, 244, 112229. https://doi.org/10.1016/j.compstruct.2020.112229

Journal of Applied Polymer Science / Nov 11, 2018

Zhang, X., Chen, L., Kowalski, C., Mulholland, T., & Osswald, T. A. (2018). Nozzle flow behavior of aluminum/polycarbonate composites in the material extrusion printing process. Journal of Applied Polymer Science, 136(12), 47252. Portico. https://doi.org/10.1002/app.47252

Polymer Engineering &amp; Science / Dec 17, 2014

Restrepo-Zapata, N. C., Osswald, T. A., & Hernández-Ortiz, J. P. (2014). Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT-diagram using DSC data. Polymer Engineering &amp; Science, 55(9), 2073–2088. https://doi.org/10.1002/pen.24049

Journal of Reinforced Plastics and Composites / May 01, 2011

Londoño-Hurtado, A., Osswald, T. A., & Hernandez-Ortíz, J. P. (2011). Modeling the behavior of fiber suspensions in the molding of polymer composites. Journal of Reinforced Plastics and Composites, 30(9), 781–790. https://doi.org/10.1177/0731684411400227

Journal of Polymer Engineering / Nov 01, 2004

Noriega, M. del P., Osswald, T. A., & Ferrier, N. (2004). IN LINE MEASUREMENT OF THE POLYMER MELTING BEHAVIOR IN SINGLE SCREW EXTRUDERS. Journal of Polymer Engineering, 24(6). https://doi.org/10.1515/polyeng.2004.24.6.557

Journal of Thermoplastic Composite Materials / Apr 01, 1991

Osswald, T. A. (1991). A Finite Element Analysis of the Thermomechanical Behavior of Fiber Reinforced Composites. Journal of Thermoplastic Composite Materials, 4(2), 173–189. https://doi.org/10.1177/089270579100400204

Polymer Engineering &amp; Science / Mar 27, 2017

Martin, B., Puentes, J., Wruck, L., & Osswald, T. A. (2017). Degree of cure of epoxy/acrylic photopolymers: Characterization with raman spectroscopy and a modified phenomenological model. Polymer Engineering &amp; Science, 58(2), 228–237. Portico. https://doi.org/10.1002/pen.24550

JOM / Jan 16, 2018

Mulholland, T., Goris, S., Boxleitner, J., Osswald, T. A., & Rudolph, N. (2018). Fiber Orientation Effects in Fused Filament Fabrication of Air-Cooled Heat Exchangers. JOM, 70(3), 298–302. https://doi.org/10.1007/s11837-017-2733-8

Journal of Composites Science / Mar 28, 2018

Albrecht, K., Osswald, T., Baur, E., Meier, T., Wartzack, S., & Müssig, J. (2018). Fibre Length Reduction in Natural Fibre-Reinforced Polymers during Compounding and Injection Moulding—Experiments Versus Numerical Prediction of Fibre Breakage. Journal of Composites Science, 2(2), 20. https://doi.org/10.3390/jcs2020020

Polymers / Nov 14, 2022

Simon, S. A., Hain, J., Sracic, M. W., Tewani, H. R., Prabhakar, P., & Osswald, T. A. (2022). Mechanical Response of Fiber-Filled Automotive Body Panels Manufactured with the Ku-FizzTM Microcellular Injection Molding Process. Polymers, 14(22), 4916. https://doi.org/10.3390/polym14224916

Recycling / Sep 20, 2022

Bustos Seibert, M., Mazzei Capote, G. A., Gruber, M., Volk, W., & Osswald, T. A. (2022). Manufacturing of a PET Filament from Recycled Material for Material Extrusion (MEX). Recycling, 7(5), 69. https://doi.org/10.3390/recycling7050069

Polymer Composites / May 04, 2022

Osswald, T. A., Jack, D., & Thompson, M. S. (2022). Polymer composites: Additive manufacturing of composites. Polymer Composites, 43(6), 3496–3497. Portico. https://doi.org/10.1002/pc.26631

Polymers / May 31, 2022

Román, A. J., Qin, S., Rodríguez, J. C., González, L. D., Zavala, V. M., & Osswald, T. A. (2022). Natural Rubber Blend Optimization via Data-Driven Modeling: The Implementation for Reverse Engineering. Polymers, 14(11), 2262. https://doi.org/10.3390/polym14112262

Materials / Mar 28, 2022

Mazzei Capote, G. A., Montoya-Ospina, M. C., Liu, Z., Mattei, M. S., Liu, B., Delgado, A. P., Yu, Z., Goldsmith, R. H., & Osswald, T. A. (2022). Compounding a High-Permittivity Thermoplastic Material and Its Applicability in Manufacturing of Microwave Photonic Crystals. Materials, 15(7), 2492. https://doi.org/10.3390/ma15072492

Applied Sciences / Mar 15, 2022

Tagscherer, N., Osswald, T. A., & Drechsler, K. (2022). Targeted Temperature Manipulation and Analysis of the Influence on Mechanical Properties in Large-Scale Extrusion Additive Manufacturing. Applied Sciences, 12(6), 2998. https://doi.org/10.3390/app12062998

Polymers / Feb 23, 2022

Marschik, C., Roland, W., & Osswald, T. A. (2022). Melt Conveying in Single-Screw Extruders: Modeling and Simulation. Polymers, 14(5), 875. https://doi.org/10.3390/polym14050875

Journal of Composites Science / Sep 15, 2021

Pyatov, N., Natarajan, H. K., & Osswald, T. A. (2021). Experimental Investigation of In-Plane Shear Behaviour of Thermoplastic Fibre-Reinforced Composites under Thermoforming Process Conditions. Journal of Composites Science, 5(9), 248. https://doi.org/10.3390/jcs5090248

Composites Part C: Open Access / Jul 01, 2021

Redmann, A., Montoya-Ospina, M. C., Karl, R., Rudolph, N., & Osswald, T. A. (2021). High-force dynamic mechanical analysis of composite sandwich panels for aerospace structures. Composites Part C: Open Access, 5, 100136. https://doi.org/10.1016/j.jcomc.2021.100136

Physics of Fluids / Jul 01, 2021

Bechara, A., Goris, S., Yanev, A., Brands, D., & Osswald, T. (2021). Novel modeling approach for fiber breakage during molding of long fiber-reinforced thermoplastics. Physics of Fluids, 33(7), 073318. https://doi.org/10.1063/5.0058693

Physics of Fluids / May 01, 2021

Kugler, S. K., Bechara, A., Perez, H., Cruz, C., Kech, A., & Osswald, T. A. (2021). Data enriched lubrication force modeling for a mechanistic fiber simulation of short fiber-reinforced thermoplastics. Physics of Fluids, 33(5), 053107. https://doi.org/10.1063/5.0049641

Journal of Composites Science / Mar 05, 2021

Kuhn, C., & Osswald, T. A. (2021). Editorial for the Special Issue on Discontinuous Fiber Composites, Volume II. Journal of Composites Science, 5(3), 71. https://doi.org/10.3390/jcs5030071

Journal of Composites Science / Jan 15, 2021

Redmann, A., Damodaran, V., Tischer, F., Prabhakar, P., & Osswald, T. A. (2021). Evaluation of Single-Lap and Block Shear Test Methods in Adhesively Bonded Composite Joints. Journal of Composites Science, 5(1), 27. https://doi.org/10.3390/jcs5010027

Journal of Composites Science / Sep 15, 2020

Knorr, L., Setter, R., Rietzel, D., Wudy, K., & Osswald, T. (2020). Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics. Journal of Composites Science, 4(3), 136. https://doi.org/10.3390/jcs4030136

Journal of Composites Science / Sep 10, 2020

Chang, T.-C., Bechara Senior, A., Celik, H., Brands, D., Yanev, A., & Osswald, T. (2020). Validation of Fiber Breakage in Simple Shear Flow with Direct Fiber Simulation. Journal of Composites Science, 4(3), 134. https://doi.org/10.3390/jcs4030134

Journal of Composites Science / Aug 07, 2020

Kech, A., Kugler, S., & Osswald, T. (2020). Significance of Model Parameter Variations in the pARD-RSC Model. Journal of Composites Science, 4(3), 109. https://doi.org/10.3390/jcs4030109

Journal of Composites Science / Jul 31, 2020

Senior, A. B., & Osswald, T. (2020). Measuring Fiber Length in the Core and Shell Regions of Injection Molded Long Fiber-Reinforced Thermoplastic Plaques. Journal of Composites Science, 4(3), 104. https://doi.org/10.3390/jcs4030104

Journal of Composites Science / Jul 22, 2020

Kugler, S. K., Dey, A. P., Saad, S., Cruz, C., Kech, A., & Osswald, T. (2020). A Flow-Dependent Fiber Orientation Model. Journal of Composites Science, 4(3), 96. https://doi.org/10.3390/jcs4030096

Polymer Composites / Mar 10, 2020

Kugler, S. K., Lambert, G. M., Cruz, C., Kech, A., Osswald, T. A., & Baird, D. G. (2020). Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data. Polymer Composites, 41(7), 2542–2556. Portico. https://doi.org/10.1002/pc.25553

Journal of Composites Science / Jun 08, 2020

Kugler, S. K., Kech, A., Cruz, C., & Osswald, T. (2020). Fiber Orientation Predictions—A Review of Existing Models. Journal of Composites Science, 4(2), 69. https://doi.org/10.3390/jcs4020069

Journal of Composites Science / May 25, 2020

Simon, S. A., Bechara Senior, A., & Osswald, T. (2020). Experimental Validation of a Direct Fiber Model for Orientation Prediction. Journal of Composites Science, 4(2), 59. https://doi.org/10.3390/jcs4020059

Polymer Composites / Oct 17, 2018

Colón Quintana, J. L., Heckner, T., Chrupala, A., Pollock, J., Goris, S., & Osswald, T. (2018). Experimental study of particle migration in polymer processing. Polymer Composites, 40(6), 2165–2177. Portico. https://doi.org/10.1002/pc.25018

Journal of Composites Science / May 16, 2019

Austermann, J., Redmann, A. J., Dahmen, V., Quintanilla, A. L., Mecham, S. J., & Osswald, T. A. (2019). Fiber-Reinforced Composite Sandwich Structures by Co-Curing with Additive Manufactured Epoxy Lattices. Journal of Composites Science, 3(2), 53. https://doi.org/10.3390/jcs3020053

Journal of Composites Science / May 10, 2019

Mazzei Capote, G. A., Redmann, A., & Osswald, T. A. (2019). Validating a Failure Surface Developed for ABS Fused Filament Fabrication Parts through Complex Loading Experiments. Journal of Composites Science, 3(2), 49. https://doi.org/10.3390/jcs3020049

Journal of Composites Science / Oct 23, 2018

Osswald, T. (2018). Editorial for the Special Issue on Discontinuous Fiber Composites. Journal of Composites Science, 2(4), 63. https://doi.org/10.3390/jcs2040063

Journal of Food Biochemistry / Dec 07, 2021

Rabelo, A. C. S., Borghesi, J., & Noratto, G. D. (2021). The role of dietary polyphenols in osteosarcoma: A possible clue about the molecular mechanisms involved in a process that is just in its infancy. Journal of Food Biochemistry, 46(1). Portico. https://doi.org/10.1111/jfbc.14026

Carbohydrate Polymers / Dec 01, 2020

Yin, C., Noratto, G. D., Fan, X., Chen, Z., Yao, F., Shi, D., & Gao, H. (2020). The Impact of Mushroom Polysaccharides on Gut Microbiota and Its Beneficial Effects to Host: A Review. Carbohydrate Polymers, 250, 116942. https://doi.org/10.1016/j.carbpol.2020.116942

Journal of Nanoscience and Nanotechnology / Mar 01, 2010

Kim, J.-W., Posey, AmmonE., Watt, GeraldD., Choi, SangH., & Lillehei, PeterT. (2010). Gold Nanoshell Assembly on a Ferritin Protein Employed as a Bio-Template. Journal of Nanoscience and Nanotechnology, 10(3), 1771–1777. https://doi.org/10.1166/jnn.2010.2078

Biophysical Journal / Feb 01, 2020

Lalmansingh, J. M., Posey, A. E., Kandola, T., Halfmann, R., & Pappu, R. V. (2020). Basin Mapping Method for Extracting Comparative Assessments of Protein Phase Behavior from In Vivo Measurements. Biophysical Journal, 118(3), 538a. https://doi.org/10.1016/j.bpj.2019.11.2949

Biophysical Journal / Feb 01, 2018

Fossat, M. J., Harmon, T. S., Posey, A. E., Choi, J.-M., & Pappu, R. V. (2018). Increasing the Accuracy in All-Atom Simulations of Intrinsically Disordered Proteins based on the Absinth Model. Biophysical Journal, 114(3), 432a. https://doi.org/10.1016/j.bpj.2017.11.2392

Biophysical Journal / Feb 01, 2020

Hill, B., Posey, A. E., Bagheri, M., Harwig, M. C., Kennedy, N. W., Hilser, V. J., & Harden, J. L. (2020). The Variable Domain from the Mitochondrial Fission Mechanoenzyme Drp1 Promotes Liquid-Liquid Phase Separation. Biophysical Journal, 118(3), 193a. https://doi.org/10.1016/j.bpj.2019.11.1170

Biophysical Journal / Feb 01, 2023

Posey, A. E., & Pappu, R. V. (2023). Quantitative analysis of intracellular protein phase transitions. Biophysical Journal, 122(3), 206a. https://doi.org/10.1016/j.bpj.2022.11.1239

Biophysical Journal / Feb 01, 2023

Fossat, M. J., Posey, A. E., Gupta, N., & Pappu, R. V. (2023). How does sequence influence charge regulation of disordered proteins? Biophysical Journal, 122(3), 200a. https://doi.org/10.1016/j.bpj.2022.11.1211

Biophysical Journal / Feb 01, 2023

Pappu, R. V., Lin, A. Z., Ruff, K. M., Jalihal, A. P., Dar, F., Posey, A. E., King, M. R., Lalmansingh, J. M., & Gladfelter, A. S. (2023). Demixing of distinct ribonucleoprotein condensates is under dynamical control. Biophysical Journal, 122(3), 443a. https://doi.org/10.1016/j.bpj.2022.11.2390

Biophysical Journal / Feb 01, 2022

Posey, A. E., Fossat, M. J., & Pappu, R. V. (2022). Heterogeneous distributions of charge states determine the apparent net charge of intrinsically disordered proteins. Biophysical Journal, 121(3), 197a. https://doi.org/10.1016/j.bpj.2021.11.1732

Biophysical Journal / Feb 01, 2022

Hill, B., Posey, A. E., BAGHERI, M., Harwig, M. C., Kennedy, N. W., Hilser, V. J., & Harden, J. L. (2022). The variable domain from the mitochondrial fission mechanoenzyme Drp1 promotes liquid-liquid phase separation. Biophysical Journal, 121(3), 40a. https://doi.org/10.1016/j.bpj.2021.11.2507

Biophysical Journal / Feb 01, 2022

Fossat, M. J., Posey, A. E., & Pappu, R. V. (2022). Charge state heterogeneity in single alpha helices helps maintain helicity over a large range of pH values. Biophysical Journal, 121(3), 300a. https://doi.org/10.1016/j.bpj.2021.11.1254

Biophysical Journal / Feb 01, 2021

Lin, A. Z., Posey, A. E., Dar, F., Gladfelter, A. S., & Pappu, R. V. (2021). Uncovering the Physical Basis for Selective Mixing Versus Unmixing of Protein-RNA Condensates. Biophysical Journal, 120(3), 93a. https://doi.org/10.1016/j.bpj.2020.11.774

Biophysical Journal / Feb 01, 2018

Hill, B., Posey, A., Bagheri, M., Kennedy, N., & Harden, J. (2018). Phase Separation of the Variable Domain of Dynamin Related Protein 1 in TMAO Suggests a Role in Assembly. Biophysical Journal, 114(3), 589a. https://doi.org/10.1016/j.bpj.2017.11.3223

Biophysical Journal / Feb 01, 2020

Fossat, M. J., Posey, A. E., & Pappu, R. V. (2020). Heuristics for the Effects of Sequence and Conformational Contexts on pKA Values of Ionizable Residues Inferred from Q-Canonical Monte Carlo Simulations. Biophysical Journal, 118(3), 539a–540a. https://doi.org/10.1016/j.bpj.2019.11.2956

Biophysical Journal / Feb 01, 2020

Ruff, K. M., Dar, F., Posey, A. E., & Pappu, R. V. (2020). Principles of Ligand Modulation of Phase Behavior in Multicomponent Systems. Biophysical Journal, 118(3), 371a. https://doi.org/10.1016/j.bpj.2019.11.2126

Biophysical Journal / Feb 01, 2020

Posey, A. E., Fossat, M. J., & Pappu, R. V. (2020). Quantifying the Effects of Charge Regulation on Disorder-Order Transitions of Highly Charged Protein Sequences. Biophysical Journal, 118(3), 540a–541a. https://doi.org/10.1016/j.bpj.2019.11.2960

Biophysical Journal / Feb 01, 2019

Fossat, M. J., Posey, A. E., & Pappu, R. V. (2019). Introducing a Novel Multi-Level Method for Simulating the pH Dependence of Charge State Fluctuations and Conformational Ensembles of Intrinsically Disordered Proteins. Biophysical Journal, 116(3), 287a. https://doi.org/10.1016/j.bpj.2018.11.1549

Biophysical Journal / Feb 01, 2019

Ruff, K. M., Posey, A. E., & Pappu, R. V. (2019). Modeling the Effects of Ligand Binding on the Phase Behavior of Aggregation-Prone Proteins. Biophysical Journal, 116(3), 199a. https://doi.org/10.1016/j.bpj.2018.11.1100

Biophysical Journal / Feb 01, 2019

Posey, A. E., Holehouse, A. S., Ruff, K. M., & Pappu, R. V. (2019). Experimental and Theoretical Methods for Mapping Coexistence Curves of Phase-Separating Biological Macromolecules. Biophysical Journal, 116(3), 349a. https://doi.org/10.1016/j.bpj.2018.11.1901

Biophysical Journal / Feb 01, 2018

Posey, A. E., Kandola, T., Pappu, R. V., & Halfmann, R. (2018). Advances in Quantitative Analysis of Intracellular Protein Phase Separation Kinetics and its Modulation by Cellular Interactions. Biophysical Journal, 114(3), 588a. https://doi.org/10.1016/j.bpj.2017.11.3219

Biophysical Journal / Feb 01, 2018

Cohan, M., Posey, A., Mittal, A., Grigsby, S., Holehouse, A., Buske, P. J., Levin, P. A., & Pappu, R. V. (2018). Sequence-Encoded Charge Patterning of the Intrinsically Disordered Tail of FtsZ Impacts Polymerization and Bacterial Cell Division. Biophysical Journal, 114(3), 590a. https://doi.org/10.1016/j.bpj.2017.11.3226

Biophysical Journal / Feb 01, 2017

Cohan, M. C., Posey, A., Grigsby, S., Holehouse, A. S., Mittal, A., Buske, P. J., Levin, P., & Pappu, R. V. (2017). The Intrinsically Disordered Tail of FtsZ Impacts Polymerization and Bacterial Cell Division Through Sequence-Encoded Charge Patterning. Biophysical Journal, 112(3), 510a–511a. https://doi.org/10.1016/j.bpj.2016.11.2760

Biophysical Journal / Feb 01, 2017

Ruff, K. M., Warner, J. B., Posey, A. E., Siong Tan, P., Lemke, E. A., Pappu, R. V., & Lashuel, H. A. (2017). Polyglutamine Length Dependent Structural Properties and Phase Behavior of Huntingtin Exon 1. Biophysical Journal, 112(3), 511a. https://doi.org/10.1016/j.bpj.2016.11.2762

Biophysical Journal / Feb 01, 2017

Posey, A. E., Harmon, T. S., & Pappu, R. V. (2017). Charge Neutralization, Not Salt Bridges, Stabilizes Alpha Helices in Repeating Blocks of Acidic and Basic Residues. Biophysical Journal, 112(3), 345a–346a. https://doi.org/10.1016/j.bpj.2016.11.1874

Biophysical Journal / Feb 01, 2016

Posey, A. E., Ruff, K. M., Harmon, T. S., Holehouse, A. S., & Pappu, R. V. (2016). Profilin Binding Modulates the Aggregation and Phase Separation of Huntingtin N-Terminal Fragments via Polyphasic Linkage. Biophysical Journal, 110(3), 399a. https://doi.org/10.1016/j.bpj.2015.11.2156

Biophysical Journal / Jan 01, 2012

Hill, B., Koppenol-Raab, M., Lees, J. P. B., Marie Manlandro, C., Picton, L. K., Posey, A., & Wells, R. C. (2012). Molecular Mechanisms Behind Mitochondrial Fission. Biophysical Journal, 102(3), 26a. https://doi.org/10.1016/j.bpj.2011.11.167

Biophysical Journal / Dec 01, 2021

Fossat, M. J., Posey, A. E., & Pappu, R. V. (2021). Quantifying charge state heterogeneity for proteins with multiple ionizable residues. Biophysical Journal, 120(24), 5438–5453. https://doi.org/10.1016/j.bpj.2021.11.2886

Optica / Nov 29, 2021

Bartlett, B., Dutt, A., & Fan, S. (2021). Deterministic photonic quantum computation in a synthetic time dimension. Optica, 8(12), 1515. https://doi.org/10.1364/optica.424258

Teaching Children Mathematics / Apr 01, 2014

Boaler, J. (2014). Research Suggests that Timed Tests Cause Math Anxiety. Teaching Children Mathematics, 20(8), 469–474. https://doi.org/10.5951/teacchilmath.20.8.0469

ACS Applied Materials &amp; Interfaces / Mar 15, 2022

Tarannum, F., Muthaiah, R., Danayat, S., Foley, K., Annam, R. S., Walters, K. B., & Garg, J. (2022). Chemically Edge-Carboxylated Graphene Enhances the Thermal Conductivity of Polyetherimide–Graphene Nanocomposites. ACS Applied Materials &amp; Interfaces, 14(12), 14753–14763. https://doi.org/10.1021/acsami.1c25279

Macromolecules / Nov 08, 2021

Britten, C. N., Lason, K., & Walters, K. B. (2021). Facile Synthesis of Tertiary Amine Pendant Polymers by Cu0-Mediated ATRP under Aqueous Conditions. Macromolecules, 54(22), 10360–10369. https://doi.org/10.1021/acs.macromol.1c01234

Journal of Polymer Science Part B: Polymer Physics / Mar 25, 2017

Zabet, M., Mishra, S., Boy, R., Walters, K. B., Naskar, A. K., & Kundu, S. (2017). Temperature-dependent self-assembly and rheological behavior of a thermoreversible pmma-Pn BA-PMMA triblock copolymer gel. Journal of Polymer Science Part B: Polymer Physics, 55(11), 877–887. Portico. https://doi.org/10.1002/polb.24336

Journal of Applied Polymer Science / Jun 02, 2016

Rowe, M. D., Eyiler, E., & Walters, K. B. (2016). Bio‐based plasticizer and thermoset polyesters: A green polymer chemistry approach. Journal of Applied Polymer Science, 133(45). Portico. https://doi.org/10.1002/app.43917

Polymer Testing / Jul 01, 2016

Rowe, M. D., Eyiler, E., & Walters, K. B. (2016). Hydrolytic degradation of bio-based polyesters: Effect of pH and time. Polymer Testing, 52, 192–199. https://doi.org/10.1016/j.polymertesting.2016.04.015

Aerosol Science and Technology / Jun 15, 2015

Vasquez, E. S., Walters, K. B., & Walters, D. K. (2015). Analysis of Particle Transport and Deposition of Micron-Sized Particles in a 90° Bend Using a Two-Fluid Eulerian–Eulerian Approach. Aerosol Science and Technology, 49(9), 692–704. https://doi.org/10.1080/02786826.2015.1062466

Journal of Applied Polymer Science / Mar 26, 2015

Lu, J., Wu, J., Chen, J., Jin, Y., Hu, T., Walters, K. B., & Ding, S. (2015). Fabrication of pH-sensitive poly(2-(diethylamino)ethyl methacrylate)/palygorskite composite microspheres via Pickering emulsion polymerization and their release behavior. Journal of Applied Polymer Science, 132(26), n/a-n/a. https://doi.org/10.1002/app.42179

Journal of Materials Chemistry B / Jan 01, 2015

Vasquez, E. S., Cunningham, J. L., McMahan, J. B., Simpson, C. L., & Walters, K. B. (2015). Fetuin-A adsorption and stabilization of calcium carbonate nanoparticles in a simulated body fluid. Journal of Materials Chemistry B, 3(31), 6411–6419. https://doi.org/10.1039/c5tb00565e

Journal of Applied Polymer Science / Jun 30, 2014

Eyiler, E., Chu, I.-W., Rowe, M. D., & Walters, K. B. (2014). Nanomechanical properties of poly(trimethylene malonate) and poly(trimethylene itaconate) during hydrolytic degradation. Journal of Applied Polymer Science, 131(22). Portico. https://doi.org/10.1002/app.41069

Journal of Applied Polymer Science / May 07, 2014

Eyiler, E., Chu, I.-W., & Walters, K. B. (2014). Toughening of poly(lactic acid) with the renewable bioplastic poly(trimethylene malonate). Journal of Applied Polymer Science, 131(20). Portico. https://doi.org/10.1002/app.40888

Langmuir / Jun 04, 2014

Vasquez, E. S., Chu, I.-W., & Walters, K. B. (2014). Janus Magnetic Nanoparticles with a Bicompartmental Polymer Brush Prepared Using Electrostatic Adsorption to Facilitate Toposelective Surface-Initiated ATRP. Langmuir, 30(23), 6858–6866. https://doi.org/10.1021/la500824r

The Journal of Physical Chemistry C / May 08, 2014

Siriwardana, K., Gadogbe, M., Ansar, S. M., Vasquez, E. S., Collier, W. E., Zou, S., Walters, K. B., & Zhang, D. (2014). Ligand Adsorption and Exchange on Pegylated Gold Nanoparticles. The Journal of Physical Chemistry C, 118(20), 11111–11119. https://doi.org/10.1021/jp501391x

International Journal of Polymeric Materials and Polymeric Biomaterials / Mar 13, 2014

Ding, S., Shen, Y., Walters, K. B., Chen, J., & Jin, Y. (2014). pH Responsive Behavior of Fe3O4@PDEA-PEGMA Core-Shell Hybrid Magnetic Nanoparticles. International Journal of Polymeric Materials and Polymeric Biomaterials, 63(10), 487–492. https://doi.org/10.1080/00914037.2013.854219

Inorganica Chimica Acta / Nov 01, 2014

Ranaweera, S. A., Rowe, M. D., Walters, K. B., Henry, W. P., White, M. G., & Rodriguez, J. M. (2014). Support of dinuclear copper triketonate complexes on silica: Monolayer loading from complex footprint and the first crystallographically characterized cis dipyridine adduct. Inorganica Chimica Acta, 423, 281–289. https://doi.org/10.1016/j.ica.2014.07.078

The Journal of Physical Chemistry C / Dec 16, 2013

Ansar, S. M., Perera, G. S., Gomez, P., Salomon, G., Vasquez, E. S., Chu, I.-W., Zou, S., Pittman, C. U., Walters, K. B., & Zhang, D. (2013). Mechanistic Study of Continuous Reactive Aromatic Organothiol Adsorption onto Silver Nanoparticles. The Journal of Physical Chemistry C, 117(51), 27146–27154. https://doi.org/10.1021/jp4090102

The Journal of Physical Chemistry C / Jan 11, 2013

Vangala, K., Siriwardana, K., Vasquez, E. S., Xin, Y., Pittman, C. U., Walters, K. B., & Zhang, D. (2013). Simultaneous and Sequential Protein and Organothiol Interactions with Gold Nanoparticles. The Journal of Physical Chemistry C, 117(3), 1366–1374. https://doi.org/10.1021/jp310085u

Acta Biomaterialia / Mar 01, 2011

Trim, M. W., Horstemeyer, M. F., Rhee, H., El Kadiri, H., Williams, L. N., Liao, J., Walters, K. B., McKittrick, J., & Park, S.-J. (2011). The effects of water and microstructure on the mechanical properties of bighorn sheep (Ovis canadensis) horn keratin. Acta Biomaterialia, 7(3), 1228–1240. https://doi.org/10.1016/j.actbio.2010.11.024

Journal of Polymer Science Part A: Polymer Chemistry / Oct 27, 2009

Ding, S., Floyd, J. A., & Walters, K. B. (2009). Comparison of surface confined ATRP and SET‐LRP syntheses for a series of amino (meth)acrylate polymer brushes on silicon substrates. Journal of Polymer Science Part A: Polymer Chemistry, 47(23), 6552–6560. Portico. https://doi.org/10.1002/pola.23698

Applied Surface Science / May 01, 2008

Martin, H. J., Schulz, K. H., Bumgardner, J. D., & Walters, K. B. (2008). An XPS study on the attachment of triethoxsilylbutyraldehyde to two titanium surfaces as a way to bond chitosan. Applied Surface Science, 254(15), 4599–4605. https://doi.org/10.1016/j.apsusc.2008.01.066

Surface Science Spectra / Dec 01, 2008

Martin, H. J., Schulz, K. H., & Walters, K. B. (2008). Piranha Treated Titanium Compared to Passivated Titanium as Characterized by XPS. Surface Science Spectra, 15(1), 23–30. CLOCKSS. https://doi.org/10.1116/11.20070702

Macromolecules / Jun 13, 2007

Walters, K. B., & Hirt, D. E. (2007). Synthesis and Characterization of a Tertiary Amine Polymer Series from Surface-Grafted Poly(tert-butyl acrylate) via Diamine Reactions. Macromolecules, 40(14), 4829–4838. https://doi.org/10.1021/ma0700882

Langmuir / May 09, 2007

Martin, H. J., Schulz, K. H., Bumgardner, J. D., & Walters, K. B. (2007). XPS Study on the Use of 3-Aminopropyltriethoxysilane to Bond Chitosan to a Titanium Surface. Langmuir, 23(12), 6645–6651. https://doi.org/10.1021/la063284v

Polymer / Sep 01, 2006

Walters, K. B., & Hirt, D. E. (2006). Grafting of end-functionalized poly(tert-butyl acrylate) to poly(ethylene-co-acrylic acid) film. Polymer, 47(19), 6567–6574. https://doi.org/10.1016/j.polymer.2006.07.018

Journal of Vinyl and Additive Technology / Jan 01, 2005

Ramirez, M. X., Walters, K. B., & Hirt, D. E. (2005). Relationship between erucamide surface concentration and coefficient of friction of LLDPE film. Journal of Vinyl and Additive Technology, 11(1), 9–12. https://doi.org/10.1002/vnl.20031

Langmuir / Jun 05, 2003

Walters, K. B., Schwark, D. W., & Hirt, D. E. (2003). Surface Characterization of Linear Low-Density Polyethylene Films Modified with Fluorinated Additives. Langmuir, 19(14), 5851–5860. https://doi.org/10.1021/la026293m

Journal of Plastic Film &amp; Sheeting / Jan 01, 2002

Sakhalkar, S. S., Walters, K. B., Hirt, D. E., Miranda, N. R., & Roberts, W. P. (2002). Surface Characterization of LLDPE Film Containing Glycerol Monostearate. Journal of Plastic Film &amp; Sheeting, 18(1), 33–43. https://doi.org/10.1106/875608702026404

Progress in Biophysics and Molecular Biology / Oct 01, 2021

Dasari, K., Somarelli, J. A., Kumar, S., & Townsend, J. P. (2021). The somatic molecular evolution of cancer: Mutation, selection, and epistasis. Progress in Biophysics and Molecular Biology, 165, 56–65. https://doi.org/10.1016/j.pbiomolbio.2021.08.003

Journal of The Royal Society Interface / Aug 06, 2013

Atkins, K. E., Townsend, J. P., Medlock, J., & Galvani, A. P. (2013). Epidemiological mechanisms of genetic resistance to kuru. Journal of The Royal Society Interface, 10(85), 20130331. https://doi.org/10.1098/rsif.2013.0331

Journal of The Royal Society Interface / Apr 11, 2012

Shim, E., Chapman, G. B., Townsend, J. P., & Galvani, A. P. (2012). The influence of altruism on influenza vaccination decisions. Journal of The Royal Society Interface, 9(74), 2234–2243. https://doi.org/10.1098/rsif.2012.0115

Journal of Membrane Science / Feb 01, 2003

Kim, Y. S., Wang, F., Hickner, M., Zawodzinski, T. A., & McGrath, J. E. (2003). Fabrication and characterization of heteropolyacid (H3PW12O40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications. Journal of Membrane Science, 212(1–2), 263–282. https://doi.org/10.1016/s0376-7388(02)00507-0

Macromolecules / Aug 01, 2003

Kim, Y. S., Dong, L., Hickner, M. A., Glass, T. E., Webb, V., & McGrath, J. E. (2003). State of Water in Disulfonated Poly(arylene ether sulfone) Copolymers and a Perfluorosulfonic Acid Copolymer (Nafion) and Its Effect on Physical and Electrochemical Properties. Macromolecules, 36(17), 6281–6285. https://doi.org/10.1021/ma0301451

Chemistry of Materials / Mar 11, 2008

Hibbs, M. R., Hickner, M. A., Alam, T. M., McIntyre, S. K., Fujimoto, C. H., & Cornelius, C. J. (2008). Transport Properties of Hydroxide and Proton Conducting Membranes. Chemistry of Materials, 20(7), 2566–2573. https://doi.org/10.1021/cm703263n

Journal of Polymer Science Part B: Polymer Physics / Oct 29, 2013

Hickner, M. A., Herring, A. M., & Coughlin, E. B. (2013). Anion exchange membranes: Current status and moving forward. Journal of Polymer Science Part B: Polymer Physics, 51(24), 1727–1735. https://doi.org/10.1002/polb.23395

Macromolecules / Feb 05, 2010

Yan, J., & Hickner, M. A. (2010). Anion Exchange Membranes by Bromination of Benzylmethyl-Containing Poly(sulfone)s. Macromolecules, 43(5), 2349–2356. https://doi.org/10.1021/ma902430y

Macromolecular Symposia / Oct 01, 2001

Wang, F., Hickner, M., Ji, Q., Harrison, W., Mecham, J., Zawodzinski, T. A., & McGrath, J. E. (2001). Synthesis of highly sulfonated poly(arylene ether sulfone) random(statistical) copolymers via direct polymerization. Macromolecular Symposia, 175(1), 387–396. https://doi.org/10.1002/1521-3900(200110)175:1<387::aid-masy387>3.0.co;2-1

Materials Today / May 01, 2010

Hickner, M. A. (2010). Ion-containing polymers: new energy &amp; clean water. Materials Today, 13(5), 34–41. https://doi.org/10.1016/s1369-7021(10)70082-1

Polymer / Sep 01, 2003

Kim, Y. S., Dong, L., Hickner, M. A., Pivovar, B. S., & McGrath, J. E. (2003). Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes. Polymer, 44(19), 5729–5736. https://doi.org/10.1016/s0032-3861(03)00580-9

Chemistry of Materials / Jun 07, 2017

Pan, J., Han, J., Zhu, L., & Hickner, M. A. (2017). Cationic Side-Chain Attachment to Poly(Phenylene Oxide) Backbones for Chemically Stable and Conductive Anion Exchange Membranes. Chemistry of Materials, 29(12), 5321–5330. https://doi.org/10.1021/acs.chemmater.7b01494

Advanced Functional Materials / May 20, 2019

Zhu, L., Peng, X., Shang, S., Kwasny, M. T., Zimudzi, T. J., Yu, X., Saikia, N., Pan, J., Liu, Z., Tew, G. N., Mustain, W. E., Yandrasits, M., & Hickner, M. A. (2019). High Performance Anion Exchange Membrane Fuel Cells Enabled by Fluoropoly(olefin) Membranes. Advanced Functional Materials, 29(26), 1902059. Portico. https://doi.org/10.1002/adfm.201902059

Macromolecules / Jun 05, 2017

Sepehr, F., Liu, H., Luo, X., Bae, C., Tuckerman, M. E., Hickner, M. A., & Paddison, S. J. (2017). Mesoscale Simulations of Anion Exchange Membranes Based on Quaternary Ammonium Tethered Triblock Copolymers. Macromolecules, 50(11), 4397–4405. https://doi.org/10.1021/acs.macromol.7b00082

Advanced Functional Materials / Apr 01, 2019

Lee, W., Lyon, C. K., Seo, J., Lopez‐Hallman, R., Leng, Y., Wang, C., Hickner, M. A., Randall, C. A., & Gomez, E. D. (2019). Ceramic–Salt Composite Electrolytes from Cold Sintering. Advanced Functional Materials, 29(20), 1807872. Portico. https://doi.org/10.1002/adfm.201807872

Journal of Composite Materials / Oct 10, 2022

Liu, W., Campbell, R. R., Periyasamy, M., & Hickner, M. A. (2022). Additive manufacturing of silicone-thermoplastic elastomeric composite architectures. Journal of Composite Materials, 56(29), 4409–4419. https://doi.org/10.1177/00219983221131614

Nature Energy / Feb 11, 2021

Salvatore, D. A., Gabardo, C. M., Reyes, A., O’Brien, C. P., Holdcroft, S., Pintauro, P., Bahar, B., Hickner, M., Bae, C., Sinton, D., Sargent, E. H., & Berlinguette, C. P. (2021). Designing anion exchange membranes for CO2 electrolysers. Nature Energy, 6(4), 339–348. https://doi.org/10.1038/s41560-020-00761-x

Advanced Functional Materials / Jul 11, 2019

Kushner, D. I., Kusoglu, A., Podraza, N. J., & Hickner, M. A. (2019). Substrate‐Dependent Molecular and Nanostructural Orientation of Nafion Thin Films. Advanced Functional Materials, 29(37), 1902699. Portico. https://doi.org/10.1002/adfm.201902699

Macromolecules / Aug 20, 2019

Kuray, P., Noda, T., Matsumoto, A., Iacob, C., Inoue, T., Hickner, M. A., & Runt, J. (2019). Ion Transport in Pendant and Backbone Polymerized Ionic Liquids. Macromolecules, 52(17), 6438–6448. https://doi.org/10.1021/acs.macromol.8b02682

The Journal of Physical Chemistry C / Jul 11, 2019

Saha, P., Nam, C., Hickner, M. A., & Zenyuk, I. V. (2019). Electrokinetic Streaming-Current Methods to Probe the Electrode–Electrolyte Interface under Applied Potentials. The Journal of Physical Chemistry C, 123(32), 19493–19505. https://doi.org/10.1021/acs.jpcc.9b03430

ACS Applied Materials &amp; Interfaces / Jul 04, 2019

Capparelli, C., Fernandez Pulido, C. R., Lopez-Hallman, R., Geise, G. M., & Hickner, M. A. (2019). Anion Exchange Membranes with Dynamic Redox-Responsive Properties. ACS Applied Materials &amp; Interfaces, 11(32), 29187–29194. https://doi.org/10.1021/acsami.9b04622

ACS Applied Materials &amp; Interfaces / May 29, 2018

Capparelli, C., Fernandez Pulido, C. R., Wiencek, R. A., & Hickner, M. A. (2018). Resistance and Permselectivity of 3D-Printed Micropatterned Anion-Exchange Membranes. ACS Applied Materials &amp; Interfaces, 11(29), 26298–26306. https://doi.org/10.1021/acsami.8b04177

The Journal of Physical Chemistry C / Feb 05, 2019

Zelovich, T., Long, Z., Hickner, M., Paddison, S. J., Bae, C., & Tuckerman, M. E. (2019). Ab Initio Molecular Dynamics Study of Hydroxide Diffusion Mechanisms in Nanoconfined Structural Mimics of Anion Exchange Membranes. The Journal of Physical Chemistry C, 123(8), 4638–4653. https://doi.org/10.1021/acs.jpcc.8b10298

Polymer / Sep 01, 2018

Miao, Z., Seo, J., & Hickner, M. A. (2018). Solvent-cast 3D printing of polysulfone and polyaniline composites. Polymer, 152, 18–24. https://doi.org/10.1016/j.polymer.2018.05.055

Journal of Applied Polymer Science / Dec 15, 2017

Seo, J., Singh, A. K., Zhang, Y., Ma, J., Bakis, C. E., Rahn, C. D., & Hickner, M. A. (2017). Electrolyte-resistant epoxy for bonding batteries based on sandwich structures. Journal of Applied Polymer Science, 135(15), 46059. Portico. https://doi.org/10.1002/app.46059

ACS Macro Letters / Feb 02, 2018

Kushner, D. I., & Hickner, M. A. (2018). Substrate-Dependent Physical Aging of Confined Nafion Thin Films. ACS Macro Letters, 7(2), 223–227. https://doi.org/10.1021/acsmacrolett.7b01004

The Journal of Physical Chemistry C / Jan 31, 2018

Dishari, S. K., Rumble, C. A., Maroncelli, M., Dura, J. A., & Hickner, M. A. (2018). Unraveling the Complex Hydration Behavior of Ionomers under Thin Film Confinement. The Journal of Physical Chemistry C, 122(6), 3471–3481. https://doi.org/10.1021/acs.jpcc.7b11888

The Analyst / Jan 01, 2018

Nam, C., Zimudzi, T. J., Wiencek, R. A., Chung, T. C. M., & Hickner, M. A. (2018). Improved ATR-FTIR detection of hydrocarbons in water with semi-crystalline polyolefin coatings on ATR elements. The Analyst, 143(22), 5589–5596. https://doi.org/10.1039/c8an01280f

The Journal of Physical Chemistry B / Dec 15, 2017

Smedley, S. B., Zimudzi, T. J., Chang, Y., Bae, C., & Hickner, M. A. (2017). Spectroscopic Characterization of Sulfonate Charge Density in Ion-Containing Polymers. The Journal of Physical Chemistry B, 121(51), 11504–11510. https://doi.org/10.1021/acs.jpcb.7b06904

Chemistry of Materials / Nov 22, 2017

Wang, L., Zhu, L., Hickner, M., & Bai, B. (2017). Molecular Engineering Mechanically Programmable Hydrogels with Orthogonal Functionalization. Chemistry of Materials, 29(23), 9981–9989. https://doi.org/10.1021/acs.chemmater.7b03398

Langmuir / Jul 05, 2017

McCrum, I. T., Hickner, M. A., & Janik, M. J. (2017). First-Principles Calculation of Pt Surface Energies in an Electrochemical Environment: Thermodynamic Driving Forces for Surface Faceting and Nanoparticle Reconstruction. Langmuir, 33(28), 7043–7052. https://doi.org/10.1021/acs.langmuir.7b01530

Polymer Chemistry / Jan 01, 2017

Yan, J., Zhu, L., Chaloux, B. L., & Hickner, M. A. (2017). Anion exchange membranes by bromination of tetramethylbiphenol-based poly(sulfone)s. Polymer Chemistry, 8(16), 2442–2449. https://doi.org/10.1039/c7py00026j

Macromolecules / Apr 03, 2017

Han, J., Zhu, L., Pan, J., Zimudzi, T. J., Wang, Y., Peng, Y., Hickner, M. A., & Zhuang, L. (2017). Elastic Long-Chain Multication Cross-Linked Anion Exchange Membranes. Macromolecules, 50(8), 3323–3332. https://doi.org/10.1021/acs.macromol.6b01140

The Journal of Physical Chemistry C / Jan 30, 2017

Rostamikia, G., Patel, R. J., Merino-Jimenez, I., Hickner, M., & Janik, M. J. (2017). Electrocatalyst Design for Direct Borohydride Oxidation Guided by First Principles. The Journal of Physical Chemistry C, 121(5), 2872–2881. https://doi.org/10.1021/acs.jpcc.6b12159

Advanced Energy Materials / Nov 16, 2016

Hou, Y., Zhou, Y., Yang, L., Li, Q., Zhang, Y., Zhu, L., Hickner, M. A., Zhang, Q. M., & Wang, Q. (2016). Flexible Ionic Diodes for Low-Frequency Mechanical Energy Harvesting. Advanced Energy Materials, 7(5), 1601983. Portico. https://doi.org/10.1002/aenm.201601983

Macromolecules / Mar 09, 2017

Zhu, L., Zimudzi, T. J., Wang, Y., Yu, X., Pan, J., Han, J., Kushner, D. I., Zhuang, L., & Hickner, M. A. (2017). Mechanically Robust Anion Exchange Membranes via Long Hydrophilic Cross-Linkers. Macromolecules, 50(6), 2329–2337. https://doi.org/10.1021/acs.macromol.6b01381

Polymer / Feb 01, 2017

Roy, A., Hickner, M. A., Lee, H.-S., Glass, T., Paul, M., Badami, A., Riffle, J. S., & McGrath, J. E. (2017). States of water in proton exchange membranes: Part A - Influence of chemical structure and composition. Polymer, 111, 297–306. https://doi.org/10.1016/j.polymer.2017.01.021

ACS Applied Materials &amp; Interfaces / Jun 23, 2016

Seo, J., Kushner, D. I., & Hickner, M. A. (2016). 3D Printing of Micropatterned Anion Exchange Membranes. ACS Applied Materials &amp; Interfaces, 8(26), 16656–16663. https://doi.org/10.1021/acsami.6b03455

Journal of Membrane Science / Sep 01, 2016

Amel, A., Gavish, N., Zhu, L., Dekel, D. R., Hickner, M. A., & Ein-Eli, Y. (2016). Bicarbonate and chloride anion transport in anion exchange membranes. Journal of Membrane Science, 514, 125–134. https://doi.org/10.1016/j.memsci.2016.04.027

ACS Applied Materials &amp; Interfaces / Jun 30, 2016

Hu, J., Peng, K., Guo, J., Shan, D., Kim, G. B., Li, Q., Gerhard, E., Zhu, L., Tu, W., Lv, W., Hickner, M. A., & Yang, J. (2016). Click Cross-Linking-Improved Waterborne Polymers for Environment-Friendly Coatings and Adhesives. ACS Applied Materials &amp; Interfaces, 8(27), 17499–17510. https://doi.org/10.1021/acsami.6b02131

Polymer Chemistry / Jan 01, 2016

Zhu, L., Zimudzi, T. J., Li, N., Pan, J., Lin, B., & Hickner, M. A. (2016). Crosslinking of comb-shaped polymer anion exchange membranes via thiol–ene click chemistry. Polymer Chemistry, 7(14), 2464–2475. https://doi.org/10.1039/c5py01911g

Polymer Chemistry / Jan 01, 2016

Zhu, L., Zimudzi, T. J., Li, N., Pan, J., Lin, B., & Hickner, M. A. (2016). Correction: Crosslinking of comb-shaped polymer anion exchange membranes via thiol–ene click chemistry. Polymer Chemistry, 7(14), 2589–2589. https://doi.org/10.1039/c6py90044e

Macromolecules / Apr 22, 2016

Zhu, L., Pan, J., Christensen, C. M., Lin, B., & Hickner, M. A. (2016). Functionalization of Poly(2,6-dimethyl-1,4-phenylene oxide)s with Hindered Fluorene Side Chains for Anion Exchange Membranes. Macromolecules, 49(9), 3300–3309. https://doi.org/10.1021/acs.macromol.6b00578

Journal of Materials Chemistry A / Jan 01, 2016

Wang, L., & Hickner, M. A. (2016). Highly ordered ion-conducting block copolymers by hydrophobic block modification. Journal of Materials Chemistry A, 4(40), 15437–15449. https://doi.org/10.1039/c6ta05308d

Journal of Membrane Science / Jun 01, 2016

Feng, T., Lin, B., Zhang, S., Yuan, N., Chu, F., Hickner, M. A., Wang, C., Zhu, L., & Ding, J. (2016). Imidazolium-based organic–inorganic hybrid anion exchange membranes for fuel cell applications. Journal of Membrane Science, 508, 7–14. https://doi.org/10.1016/j.memsci.2016.02.019

ACS Applied Materials &amp; Interfaces / May 24, 2016

Nam, C., Zimudzi, T. J., Geise, G. M., & Hickner, M. A. (2016). Increased Hydrogel Swelling Induced by Absorption of Small Molecules. ACS Applied Materials &amp; Interfaces, 8(22), 14263–14270. https://doi.org/10.1021/acsami.6b02069

Macromolecules / Jan 25, 2016

Zhu, L., Pan, J., Wang, Y., Han, J., Zhuang, L., & Hickner, M. A. (2016). Multication Side Chain Anion Exchange Membranes. Macromolecules, 49(3), 815–824. https://doi.org/10.1021/acs.macromol.5b02671

Chemistry of Materials / Apr 06, 2016

Nuñez, S. A., Capparelli, C., & Hickner, M. A. (2016). N-Alkyl Interstitial Spacers and Terminal Pendants Influence the Alkaline Stability of Tetraalkylammonium Cations for Anion Exchange Membrane Fuel Cells. Chemistry of Materials, 28(8), 2589–2598. https://doi.org/10.1021/acs.chemmater.5b04767

Macromolecular Chemistry and Physics / Aug 31, 2016

Kushner, D. I., Zhu, L., Kusoglu, A., & Hickner, M. A. (2016). Side Chain Influence on the Mechanical Properties and Water Uptake of Confined Comb-Shaped Cationic Polymer Thin Films. Macromolecular Chemistry and Physics, 217(21), 2442–2451. Portico. https://doi.org/10.1002/macp.201600254

ACS Macro Letters / Dec 22, 2015

Zimudzi, T. J., & Hickner, M. A. (2015). Signal Enhanced FTIR Analysis of Alignment in NAFION Thin Films at SiO2 and Au Interfaces. ACS Macro Letters, 5(1), 83–87. https://doi.org/10.1021/acsmacrolett.5b00800

Journal of Membrane Science / Jun 01, 2016

Cassady, H. J., Cimino, E. C., Kumar, M., & Hickner, M. A. (2016). Specific ion effects on the permselectivity of sulfonated poly(ether sulfone) cation exchange membranes. Journal of Membrane Science, 508, 146–152. https://doi.org/10.1016/j.memsci.2016.02.048

Polymer / Oct 01, 2016

Hickner, M. A., Geise, G. M., & Roy, A. (2016). Using the tools of polymer science to impact water treatment membranes. Polymer, 103, 415–416. https://doi.org/10.1016/j.polymer.2016.10.001

Journal of Materials Chemistry A / Jan 01, 2016

Chen, C., Pan, J., Han, J., Wang, Y., Zhu, L., Hickner, M. A., & Zhuang, L. (2016). Varying the microphase separation patterns of alkaline polymer electrolytes. Journal of Materials Chemistry A, 4(11), 4071–4081. https://doi.org/10.1039/c5ta09438k

Journal of The Electrochemical Society / Jan 01, 2015

Amel, A., Smedley, S. B., Dekel, D. R., Hickner, M. A., & Ein-Eli, Y. (2015). Characterization and Chemical Stability of Anion Exchange Membranes Cross-Linked with Polar Electron-Donating Linkers. Journal of The Electrochemical Society, 162(9), F1047–F1055. https://doi.org/10.1149/2.0891509jes

Journal of Materials Chemistry C / Jan 01, 2015

Adhikari, J. M., Vakhshouri, K., Calitree, B. D., Hexemer, A., Hickner, M. A., & Gomez, E. D. (2015). Controlling crystallization to improve charge mobilities in transistors based on 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene. Journal of Materials Chemistry C, 3(34), 8799–8803. https://doi.org/10.1039/c5tc01253h

Journal of Sandwich Structures &amp; Materials / Jun 24, 2015

Singh, A. K., Cao, L., Ma, J., Seo, J., Bakis, C. E., Zhang, Y., Hickner, M. A., & Rahn, C. D. (2015). Design, manufacture and test of a novel structural battery based on sandwich construction. Journal of Sandwich Structures &amp; Materials, 17(6), 666–690. https://doi.org/10.1177/1099636215591908

Macromolecules / Sep 29, 2015

Chang, Y., Mohanty, A. D., Smedley, S. B., Abu-Hakmeh, K., Lee, Y. H., Morgan, J. E., Hickner, M. A., Jang, S. S., Ryu, C. Y., & Bae, C. (2015). Effect of Superacidic Side Chain Structures on High Conductivity Aromatic Polymer Fuel Cell Membranes. Macromolecules, 48(19), 7117–7126. https://doi.org/10.1021/acs.macromol.5b01739

Journal of Polymer Science Part A: Polymer Chemistry / Sep 03, 2015

Zigmond, J. S., Pollack, K. A., Smedley, S., Raymond, J. E., Link, L. A., Pavía-Sanders, A., Hickner, M. A., & Wooley, K. L. (2015). Investigation of intricate, amphiphilic crosslinked hyperbranched fluoropolymers as anti-icing coatings for extreme environments. Journal of Polymer Science Part A: Polymer Chemistry, 54(2), 238–244. Portico. https://doi.org/10.1002/pola.27800

Solid State Ionics / Jul 01, 2015

Smedley, S. B., Chang, Y., Bae, C., & Hickner, M. A. (2015). Measuring water hydrogen bonding distributions in proton exchange membranes using linear Fourier Transform Infrared spectroscopy. Solid State Ionics, 275, 66–70. https://doi.org/10.1016/j.ssi.2015.03.020

Chemistry of Materials / Sep 28, 2015

Pan, J., Zhu, L., Han, J., & Hickner, M. A. (2015). Mechanically Tough and Chemically Stable Anion Exchange Membranes from Rigid-Flexible Semi-Interpenetrating Networks. Chemistry of Materials, 27(19), 6689–6698. https://doi.org/10.1021/acs.chemmater.5b02557

Macromolecules / Jul 24, 2015

Le, T. P., Shang, Z., Wang, L., Li, N., Vajjala Kesava, S., O’Connor, J. W., Chang, Y., Bae, C., Zhu, C., Hexemer, A., Gomez, E. W., Salleo, A., Hickner, M. A., & Gomez, E. D. (2015). Miscibility and Acid Strength Govern Contact Doping of Organic Photovoltaics with Strong Polyelectrolytes. Macromolecules, 48(15), 5162–5171. https://doi.org/10.1021/acs.macromol.5b00724

Macromolecules / Mar 11, 2014

Mohanty, A. D., Lee, Y.-B., Zhu, L., Hickner, M. A., & Bae, C. (2014). Anion Exchange Fuel Cell Membranes Prepared from C–H Borylation and Suzuki Coupling Reactions. Macromolecules, 47(6), 1973–1980. https://doi.org/10.1021/ma500125t

ChemSusChem / Sep 25, 2014

Vargas-Barbosa, N. M., Geise, G. M., Hickner, M. A., & Mallouk, T. E. (2014). Assessing the Utility of Bipolar Membranes for use in Photoelectrochemical Water-Splitting Cells. ChemSusChem, 7(11), 3017–3020. https://doi.org/10.1002/cssc.201402535

Advanced Energy Materials / May 08, 2014

Mor, G. K., Jones, D., Le, T. P., Shang, Z., Weathers, P. J., Woltermann, M. K. B., Vakhshouri, K., Williams, B. P., Tohran, S. A., Saito, T., Verduzco, R., Salleo, A., Hickner, M. A., & Gomez, E. D. (2014). Contact Doping with Sub-Monolayers of Strong Polyelectrolytes for Organic Photovoltaics. Advanced Energy Materials, 4(13), 1400439. Portico. https://doi.org/10.1002/aenm.201400439

Chemical Communications / Jan 01, 2014

Li, N., Wang, L., & Hickner, M. (2014). Cross-linked comb-shaped anion exchange membranes with high base stability. Chemical Communications, 50(31), 4092. https://doi.org/10.1039/c3cc49027k

Journal of Polymer Science Part B: Polymer Physics / Nov 28, 2013

Hickner, M. A., Herring, A. M., & Coughlin, E. B. (2013). Corrigendum: Anion exchange membranes: Current status and moving forward. Journal of Polymer Science Part B: Polymer Physics, 52(4), 347–347. Portico. https://doi.org/10.1002/polb.23431

Advanced Functional Materials / Apr 24, 2014

Kusoglu, A., Kushner, D., Paul, D. K., Karan, K., Hickner, M. A., & Weber, A. Z. (2014). Impact of Substrate and Processing on Confinement of Nafion Thin Films. Advanced Functional Materials, 24(30), 4763–4774. https://doi.org/10.1002/adfm.201304311

Journal of The Electrochemical Society / Jan 01, 2014

Amel, A., Zhu, L., Hickner, M., & Ein-Eli, Y. (2014). Influence of Sulfone Linkage on the Stability of Aromatic Quaternary Ammonium Polymers for Alkaline Fuel Cells. Journal of The Electrochemical Society, 161(5), F615–F621. https://doi.org/10.1149/2.044405jes

Polymer Chemistry / Jan 01, 2014

Wang, L., & Hickner, M. A. (2014). Low-temperature crosslinking of anion exchange membranes. Polymer Chemistry, 5(8), 2928–2935. https://doi.org/10.1039/c3py01490h

Journal of Polymer Science Part B: Polymer Physics / Aug 25, 2014

Chaloux, B. L., Ricks-Laskoski, H. L., Miller, J. B., Saunders, K. M., & Hickner, M. A. (2014). Probing microphase separation and proton transport cooperativity in polymer-tethered 1H-tetrazoles. Journal of Polymer Science Part B: Polymer Physics, 52(21), 1375–1387. https://doi.org/10.1002/polb.23573

Chemistry of Materials / Oct 23, 2014

Vaughn II, D. D., Araujo, J., Meduri, P., Callejas, J. F., Hickner, M. A., & Schaak, R. E. (2014). Solution Synthesis of Cu3PdN Nanocrystals as Ternary Metal Nitride Electrocatalysts for the Oxygen Reduction Reaction. Chemistry of Materials, 26(21), 6226–6232. https://doi.org/10.1021/cm5029723

Macromolecules / Jun 17, 2014

Ricks-Laskoski, H. L., Chaloux, B. L., Deese, S. M., Laskoski, M., Miller, J. B., Buckley, M. A., Baldwin, J. W., Hickner, M. A., Saunders, K. M., & Christensen, C. M. (2014). Tetrazolation of Side Chains and Anhydrous Conductivity in a Hydrophobic Polymer. Macromolecules, 47(13), 4243–4250. https://doi.org/10.1021/ma501068j

ACS Macro Letters / Aug 22, 2013

Geise, G. M., Hickner, M. A., & Logan, B. E. (2013). Ammonium Bicarbonate Transport in Anion Exchange Membranes for Salinity Gradient Energy. ACS Macro Letters, 2(9), 814–817. https://doi.org/10.1021/mz4003408

Macromolecules / Jan 09, 2013

Dishari, S. K., & Hickner, M. A. (2013). Confinement and Proton Transfer in NAFION Thin Films. Macromolecules, 46(2), 413–421. https://doi.org/10.1021/ma3011137

The Journal of Physical Chemistry B / Nov 26, 2013

Black, S. B., Chang, Y., Bae, C., & Hickner, M. A. (2013). FTIR Characterization of Water–Polymer Interactions in Superacid Polymers. The Journal of Physical Chemistry B, 117(50), 16266–16274. https://doi.org/10.1021/jp406242h

Macromolecules / Nov 22, 2013

Chen, D., & Hickner, M. A. (2013). Ion Clustering in Quaternary Ammonium Functionalized Benzylmethyl Containing Poly(arylene ether ketone)s. Macromolecules, 46(23), 9270–9278. https://doi.org/10.1021/ma401620m

Macromolecules / Jan 14, 2013

Disabb-Miller, M. L., Johnson, Z. D., & Hickner, M. A. (2013). Ion Motion in Anion and Proton-Conducting Triblock Copolymers. Macromolecules, 46(3), 949–956. https://doi.org/10.1021/ma301947t

ACS Applied Materials &amp; Interfaces / Oct 01, 2013

Geise, G. M., Hickner, M. A., & Logan, B. E. (2013). Ionic Resistance and Permselectivity Tradeoffs in Anion Exchange Membranes. ACS Applied Materials &amp; Interfaces, 5(20), 10294–10301. https://doi.org/10.1021/am403207w

Journal of Membrane Science / Sep 01, 2013

Pan, J., Wang, S., Xiao, M., Hickner, M., & Meng, Y. (2013). Layered zirconium phosphate sulfophenylphosphonates reinforced sulfonated poly (fluorenyl ether ketone) hybrid membranes with high proton conductivity and low vanadium ion permeability. Journal of Membrane Science, 443, 19–27. https://doi.org/10.1016/j.memsci.2013.04.068

Journal of the American Ceramic Society / Aug 05, 2013

Welsh, A. J., Wilke, R. H. T., Hickner, M. A., & Trolier-McKinstry, S. (2013). Low-Cost, Damage-Free Patterning of Lead Zirconate Titanate Films. Journal of the American Ceramic Society, 96(9), 2799–2805. Portico. https://doi.org/10.1111/jace.12505

ACS Applied Materials &amp; Interfaces / Jul 19, 2013

Chen, D., Hickner, M. A., Agar, E., & Kumbur, E. C. (2013). Optimized Anion Exchange Membranes for Vanadium Redox Flow Batteries. ACS Applied Materials &amp; Interfaces, 5(15), 7559–7566. https://doi.org/10.1021/am401858r

Journal of Membrane Science / Jun 01, 2013

Chen, D., Hickner, M. A., Agar, E., & Kumbur, E. C. (2013). Optimizing membrane thickness for vanadium redox flow batteries. Journal of Membrane Science, 437, 108–113. https://doi.org/10.1016/j.memsci.2013.02.007

Polym. Chem. / Jan 01, 2013

Chang, Y., Brunello, G. F., Fuller, J., Disabb-Miller, M. L., Hawley, M. E., Kim, Y. S., Hickner, M. A., Jang, S. S., & Bae, C. (2013). Polymer electrolyte membranes based on poly(arylene ether sulfone) with pendant perfluorosulfonic acid. Polym. Chem., 4(2), 272–281. https://doi.org/10.1039/c2py20666h

ACS Macro Letters / Dec 26, 2012

Nuñez, S. A., & Hickner, M. A. (2012). Quantitative 1H NMR Analysis of Chemical Stabilities in Anion-Exchange Membranes. ACS Macro Letters, 2(1), 49–52. https://doi.org/10.1021/mz300486h

Macromolecules / Jan 23, 2013

Modestino, M. A., Paul, D. K., Dishari, S., Petrina, S. A., Allen, F. I., Hickner, M. A., Karan, K., Segalman, R. A., & Weber, A. Z. (2013). Self-Assembly and Transport Limitations in Confined Nafion Films. Macromolecules, 46(3), 867–873. https://doi.org/10.1021/ma301999a

Journal of Polymer Science Part B: Polymer Physics / Oct 05, 2013

Yan, J., Moore, H. D., Hibbs, M. R., & Hickner, M. A. (2013). Synthesis and structure-property relationships of poly(sulfone)s for anion exchange membranes. Journal of Polymer Science Part B: Polymer Physics, 51(24), 1790–1798. https://doi.org/10.1002/polb.23331

Macromolecules / Nov 22, 2013

Disabb-Miller, M. L., Zha, Y., DeCarlo, A. J., Pawar, M., Tew, G. N., & Hickner, M. A. (2013). Water Uptake and Ion Mobility in Cross-Linked Bis(terpyridine)ruthenium-Based Anion Exchange Membranes. Macromolecules, 46(23), 9279–9287. https://doi.org/10.1021/ma401701n

ACS Macro Letters / Jan 18, 2012

Dishari, S. K., & Hickner, M. A. (2012). Antiplasticization and Water Uptake of Nafion Thin Films. ACS Macro Letters, 1(2), 291–295. https://doi.org/10.1021/mz200169a

ACS Applied Materials &amp; Interfaces / Nov 01, 2012

Chen, D., & Hickner, M. A. (2012). Degradation of Imidazolium- and Quaternary Ammonium-Functionalized Poly(fluorenyl ether ketone sulfone) Anion Exchange Membranes. ACS Applied Materials &amp; Interfaces, 4(11), 5775–5781. https://doi.org/10.1021/am301557w

Journal of Membrane Science / Oct 01, 2012

Chen, D., Hickner, M. A., Wang, S., Pan, J., Xiao, M., & Meng, Y. (2012). Directly fluorinated polyaromatic composite membranes for vanadium redox flow batteries. Journal of Membrane Science, 415–416, 139–144. https://doi.org/10.1016/j.memsci.2012.04.048

ACS Applied Materials &amp; Interfaces / Nov 28, 2012

Chen, G., Wei, B., Luo, Y., Logan, B. E., & Hickner, M. A. (2012). Polymer Separators for High-Power, High-Efficiency Microbial Fuel Cells. ACS Applied Materials &amp; Interfaces, 4(12), 6454–6457. https://doi.org/10.1021/am302301t

Journal of Polymer Science Part B: Polymer Physics / Oct 17, 2011

Hickner, M. A. (2011). Water-mediated transport in ion-containing polymers. Journal of Polymer Science Part B: Polymer Physics, 50(1), 9–20. https://doi.org/10.1002/polb.22381

Macromolecules / Oct 11, 2011

Chang, Y., Brunello, G. F., Fuller, J., Hawley, M., Kim, Y. S., Disabb-Miller, M., Hickner, M. A., Jang, S. S., & Bae, C. (2011). Aromatic Ionomers with Highly Acidic Sulfonate Groups: Acidity, Hydration, and Proton Conductivity. Macromolecules, 44(21), 8458–8469. https://doi.org/10.1021/ma201759z

Macromolecules / Nov 30, 2010

Elabd, Y. A., & Hickner, M. A. (2010). Block Copolymers for Fuel Cells. Macromolecules, 44(1), 1–11. https://doi.org/10.1021/ma101247c

The Journal of Physical Chemistry B / Jan 10, 2011

Lee, D. K., Saito, T., Benesi, A. J., Hickner, M. A., & Allcock, H. R. (2011). Characterization of Water in Proton-Conducting Membranes by Deuterium NMR T1 Relaxation. The Journal of Physical Chemistry B, 115(5), 776–783. https://doi.org/10.1021/jp106757b

Journal of Applied Electrochemistry / May 03, 2011

Kim, S., Tighe, T. B., Schwenzer, B., Yan, J., Zhang, J., Liu, J., Yang, Z., & Hickner, M. A. (2011). Chemical and mechanical degradation of sulfonated poly(sulfone) membranes in vanadium redox flow batteries. Journal of Applied Electrochemistry, 41(10), 1201–1213. https://doi.org/10.1007/s10800-011-0313-0

Journal of Materials Chemistry / Jan 01, 2011

Gross, M. L., Zavadil, K. R., & Hickner, M. A. (2011). Chemical mapping and electrical conductivity of carbon nanotube patterned arrays. Journal of Materials Chemistry, 21(37), 14259. https://doi.org/10.1039/c1jm11107h

Journal of Polymer Science Part B: Polymer Physics / Jul 07, 2011

Patel, R. J., Tighe, T. B., Ivanov, I. N., & Hickner, M. A. (2011). Electro-optical properties of electropolymerized poly(3-hexylthiophene)/carbon nanotube composite thin films. Journal of Polymer Science Part B: Polymer Physics, 49(17), 1269–1275. Portico. https://doi.org/10.1002/polb.22307

Macromolecules / Jun 07, 2011

Xu, K., Oh, H., Hickner, M. A., & Wang, Q. (2011). Highly Conductive Aromatic Ionomers with Perfluorosulfonic Acid Side Chains for Elevated Temperature Fuel Cells. Macromolecules, 44(12), 4605–4609. https://doi.org/10.1021/ma201188e

Macromolecules / Nov 30, 2011

Zhang, L., Chaloux, B. L., Saito, T., Hickner, M. A., & Lutkenhaus, J. L. (2011). Ion Conduction in Poly(ethylene oxide) Ionically Assembled Complexes. Macromolecules, 44(24), 9723–9730. https://doi.org/10.1021/ma201715s

Journal of Polymer Science Part B: Polymer Physics / Jul 29, 2011

Weber, R. L., Ye, Y., Banik, S. M., Elabd, Y. A., Hickner, M. A., & Mahanthappa, M. K. (2011). Thermal and ion transport properties of hydrophilic and hydrophobic polymerized styrenic imidazolium ionic liquids. Journal of Polymer Science Part B: Polymer Physics, 49(18), 1287–1296. Portico. https://doi.org/10.1002/polb.22319

Langmuir / Mar 28, 2011

Xie, H., Saito, T., & Hickner, M. A. (2011). Zeta Potential of Ion-Conductive Membranes by Streaming Current Measurements. Langmuir, 27(8), 4721–4727. https://doi.org/10.1021/la105120f

Macromolecular Rapid Communications / Mar 01, 2010

Jang, W.-S., Saito, T., Hickner, M. A., & Lutkenhaus, J. L. (2010). Electrostatic Assembly of Poly(ethylene glycol) Nanotubes. Macromolecular Rapid Communications, 31(8), 745–751. Portico. https://doi.org/10.1002/marc.200900807

Journal of Fuel Cell Science and Technology / Oct 05, 2009

Hickner, M. A., Chen, K. S., & Siegel, N. P. (2009). Elucidating Liquid Water Distribution and Removal in an Operating Proton Exchange Membrane Fuel Cell via Neutron Radiography. Journal of Fuel Cell Science and Technology, 7(1). https://doi.org/10.1115/1.3115624

Journal of Materials Chemistry / Jan 01, 2010

Xu, K., Chanthad, C., Hickner, M. A., & Wang, Q. (2010). Highly selective proton conductive networks based on chain-end functionalized polymers with perfluorosulfonate side groups. Journal of Materials Chemistry, 20(30), 6291. https://doi.org/10.1039/c000044b

Journal of Materials Chemistry / Jan 01, 2010

Moore, H. D., Saito, T., & Hickner, M. A. (2010). Morphology and transport properties of midblock-sulfonated triblock copolymers. Journal of Materials Chemistry, 20(30), 6316. https://doi.org/10.1039/c0jm00068j

Journal of The Electrochemical Society / Jan 01, 2010

Hickner, M. A., Siegel, N. P., Chen, K. S., Hussey, D. S., & Jacobson, D. L. (2010). Observations of Transient Flooding in a Proton Exchange Membrane Fuel Cell Using Time-Resolved Neutron Radiography. Journal of The Electrochemical Society, 157(1), B32. https://doi.org/10.1149/1.3250864

Macromolecules / Dec 31, 2009

Saito, T., Moore, H. D., & Hickner, M. A. (2009). Synthesis of Midblock-Sulfonated Triblock Copolymers. Macromolecules, 43(2), 599–601. https://doi.org/10.1021/ma9023125

Macromolecules / Jan 25, 2010

Xu, K., Li, K., Ewing, C. S., Hickner, M. A., & Wang, Q. (2010). Synthesis of Proton Conductive Polymers with High Electrochemical Selectivity. Macromolecules, 43(4), 1692–1694. https://doi.org/10.1021/ma902716x

Electrochemical and Solid-State Letters / Jan 01, 2010

Gross, M. L., & Hickner, M. A. (2010). Using Cyclic Voltammetry to Measure Bandgap Modulation of Functionalized Carbon Nanotubes. Electrochemical and Solid-State Letters, 13(2), K5. https://doi.org/10.1149/1.3264094

ACS Applied Materials &amp; Interfaces / Oct 27, 2009

Xu, K., Chanthad, C., Gadinski, M. R., Hickner, M. A., & Wang, Q. (2009). Acid-Functionalized Polysilsesquioxane−Nafion Composite Membranes with High Proton Conductivity and Enhanced Selectivity. ACS Applied Materials &amp; Interfaces, 1(11), 2573–2579. https://doi.org/10.1021/am900498u

Nano Letters / Mar 24, 2009

Song, Y., Hickner, M. A., Challa, S. R., Dorin, R. M., Garcia, R. M., Wang, H., Jiang, Y.-B., Li, P., Qiu, Y., van Swol, F., Medforth, C. J., Miller, J. E., Nwoga, T., Kawahara, K., Li, W., & Shelnutt, J. A. (2009). Evolution of Dendritic Platinum Nanosheets into Ripening-Resistant Holey Sheets. Nano Letters, 9(4), 1534–1539. https://doi.org/10.1021/nl803582j

Macromolecular Symposia / May 01, 2009

Hickner, M. A., Tudryn, G. J., Alam, T. M., Hibbs, M. R., & Fujimoto, C. H. (2009). Polymers with Tethered Anionic and Cationic Groups as Membranes for Fuel Cells. Macromolecular Symposia, 279(1), 59–62. https://doi.org/10.1002/masy.200950509

Journal of Polymer Science Part A: Polymer Chemistry / Jan 15, 2009

Roy, A., Hickner, M. A., Einsla, B. R., Harrison, W. L., & McGrath, J. E. (2009). Synthesis and characterization of partially disulfonated hydroquinone-based poly(arylene ether sulfone)s random copolymers for application as proton exchange membranes. Journal of Polymer Science Part A: Polymer Chemistry, 47(2), 384–391. https://doi.org/10.1002/pola.23153

Journal of The Electrochemical Society / Jan 01, 2009

Staser, J. A., Norman, K., Fujimoto, C. H., Hickner, M. A., & Weidner, J. W. (2009). Transport Properties and Performance of Polymer Electrolyte Membranes for the Hybrid Sulfur Electrolyzer. Journal of The Electrochemical Society, 156(7), B842. https://doi.org/10.1149/1.3129676

Journal of The Electrochemical Society / Jan 01, 2008

Hickner, M. A., Siegel, N. P., Chen, K. S., Hussey, D. S., Jacobson, D. L., & Arif, M. (2008). In Situ High-Resolution Neutron Radiography of Cross-Sectional Liquid Water Profiles in Proton Exchange Membrane Fuel Cells. Journal of The Electrochemical Society, 155(4), B427. https://doi.org/10.1149/1.2826287

Journal of The Electrochemical Society / Jan 01, 2008

Hickner, M. A., Siegel, N. P., Chen, K. S., Hussey, D. S., Jacobson, D. L., & Arif, M. (2008). Understanding Liquid Water Distribution and Removal Phenomena in an Operating PEMFC via Neutron Radiography. Journal of The Electrochemical Society, 155(3), B294. https://doi.org/10.1149/1.2825298

Journal of The Electrochemical Society / Jan 01, 2007

Wiles, K. B., Akle, B. J., Hickner, M. A., Bennett, M., Leo, D. J., & McGrath, J. E. (2007). Directly Copolymerized Poly(arylene sulfide sulfone) and Poly(arylene ether sulfone) Disulfonated Copolymers for Use in Ionic Polymer Transducers. Journal of The Electrochemical Society, 154(6), P77. https://doi.org/10.1149/1.2718478

Journal of Polymer Science Part B: Polymer Physics / Jan 01, 2006

Roy, A., Hickner, M. A., Yu, X., Li, Y., Glass, T. E., & McGrath, J. E. (2006). Influence of chemical composition and sequence length on the transport properties of proton exchange membranes. Journal of Polymer Science Part B: Polymer Physics, 44(16), 2226–2239. https://doi.org/10.1002/polb.20859

Journal of The Electrochemical Society / Jan 01, 2006

Hickner, M. A., Siegel, N. P., Chen, K. S., McBrayer, D. N., Hussey, D. S., Jacobson, D. L., & Arif, M. (2006). Real-Time Imaging of Liquid Water in an Operating Proton Exchange Membrane Fuel Cell. Journal of The Electrochemical Society, 153(5), A902. https://doi.org/10.1149/1.2184893

Journal of Engineering Materials and Technology / Jun 06, 2006

Liu, D., Hickner, M. A., Case, S. W., & Lesko, J. J. (2006). Relaxation of Proton Conductivity and Stress in Proton Exchange Membranes Under Strain. Journal of Engineering Materials and Technology, 128(4), 503–508. https://doi.org/10.1115/1.2345441

Polymer / May 01, 2006

Hickner, M. A., Fujimoto, C. H., & Cornelius, C. J. (2006). Transport in sulfonated poly(phenylene)s: Proton conductivity, permeability, and the state of water. Polymer, 47(11), 4238–4244. https://doi.org/10.1016/j.polymer.2006.02.034

Journal of Membrane Science / Mar 15, 2005

EVERY, H., HICKNER, M., MCGRATH, J., & ZAWODZINSKIJR, T. (2005). An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes. Journal of Membrane Science, 250(1–2), 183–188. https://doi.org/10.1016/j.memsci.2004.10.026

Journal of Materials Science / Jul 01, 2005

Akle, B. J., Leo, D. J., Hickner, M. A., & McGrath, J. E. (2005). Correlation of capacitance and actuation in ionomeric polymer transducers. Journal of Materials Science, 40(14), 3715–3724. https://doi.org/10.1007/s10853-005-3312-x

Macromolecules / May 12, 2005

Fujimoto, C. H., Hickner, M. A., Cornelius, C. J., & Loy, D. A. (2005). Ionomeric Poly(phenylene) Prepared by Diels−Alder Polymerization:  Synthesis and Physical Properties of a Novel Polyelectrolyte. Macromolecules, 38(12), 5010–5016. https://doi.org/10.1021/ma0482720

Journal of Membrane Science / Nov 01, 2004

Kim, Y. S., Hickner, M. A., Dong, L., Pivovar, B. S., & McGrath, J. E. (2004). Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability. Journal of Membrane Science, 243(1–2), 317–326. https://doi.org/10.1016/j.memsci.2004.06.035

Journal of Polymer Science Part B: Polymer Physics / Oct 10, 2003

Kim, Y. S., Wang, F., Hickner, M., Mccartney, S., Hong, Y. T., Harrison, W., Zawodzinski, T. A., & Mcgrath, J. E. (2003). Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton-exchange membranes for fuel-cell use above 100 °C. Journal of Polymer Science Part B: Polymer Physics, 41(22), 2816–2828. Portico. https://doi.org/10.1002/polb.10496

Journal of Membrane Science / Mar 01, 2002

Wang, F., Hickner, M., Kim, Y. S., Zawodzinski, T. A., & McGrath, J. E. (2002). Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes. Journal of Membrane Science, 197(1–2), 231–242. https://doi.org/10.1016/s0376-7388(01)00620-2

Chemistry of Materials / Apr 18, 2022

Chemistry of Materials / Apr 27, 2022

Chemistry of Materials / May 26, 2020

ACS Materials Letters / Sep 13, 2019

ACS Materials Letters / Jul 09, 2019

Chemistry of Materials / Nov 21, 2017

ACS Nano / May 27, 2022

Kim, G., Kim, H. M., Kumar, P., Rahaman, M., Stevens, C. E., Jeon, J., Jo, K., Kim, K.-H., Trainor, N., Zhu, H., Sohn, B.-H., Stach, E. A., Hendrickson, J. R., Glavin, N. R., Suh, J., Redwing, J. M., & Jariwala, D. (2022). High-Density, Localized Quantum Emitters in Strained 2D Semiconductors. ACS Nano, 16(6), 9651–9659. https://doi.org/10.1021/acsnano.2c02974

ACS Nano / Apr 18, 2022

Kim, K.-H., Andreev, M., Choi, S., Shim, J., Ahn, H., Lynch, J., Lee, T., Lee, J., Nazif, K. N., Kumar, A., Kumar, P., Choo, H., Jariwala, D., Saraswat, K. C., & Park, J.-H. (2022). High-Efficiency WSe2 Photovoltaic Devices with Electron-Selective Contacts. ACS Nano, 16(6), 8827–8836. https://doi.org/10.1021/acsnano.1c10054

Nano Letters / Jun 08, 2022

Kumar, P., Meng, A. C., Jo, K., Stach, E. A., & Jariwala, D. (2022). Interfacial Reaction and Diffusion at the One-Dimensional Interface of Two-Dimensional PtSe2. Nano Letters, 22(12), 4733–4740. https://doi.org/10.1021/acs.nanolett.2c00874

Nature Nanotechnology / Dec 02, 2021

Kumar, P., Lynch, J., Song, B., Ling, H., Barrera, F., Kisslinger, K., Zhang, H., Anantharaman, S. B., Digani, J., Zhu, H., Choudhury, T. H., McAleese, C., Wang, X., Conran, B. R., Whear, O., Motala, M. J., Snure, M., Muratore, C., Redwing, J. M., … Jariwala, D. (2021). Light–matter coupling in large-area van der Waals superlattices. Nature Nanotechnology, 17(2), 182–189. https://doi.org/10.1038/s41565-021-01023-x

Nano Letters / Jan 11, 2022

Brewer, J., Campbell, M. F., Kumar, P., Kulkarni, S., Jariwala, D., Bargatin, I., & Raman, A. P. (2022). Multiscale Photonic Emissivity Engineering for Relativistic Lightsail Thermal Regulation. Nano Letters, 22(2), 594–601. https://doi.org/10.1021/acs.nanolett.1c03273

Advanced Materials / Mar 28, 2022

Alfieri, A., Anantharaman, S. B., Zhang, H., & Jariwala, D. (2022). Nanomaterials for Quantum Information Science and Engineering. Advanced Materials, 2109621. Portico. https://doi.org/10.1002/adma.202109621

Nano Letters / Dec 23, 2021

Campbell, M. F., Brewer, J., Jariwala, D., Raman, A. P., & Bargatin, I. (2021). Relativistic Light Sails Need to Billow. Nano Letters, 22(1), 90–96. https://doi.org/10.1021/acs.nanolett.1c03272

Nanoscale / Jan 01, 2022

Batra, G., Sharma, S., Kaushik, K., Rao, C., Kumar, P., Kumar, K., Ghosh, S., Jariwala, D., Stach, E. A., Yadav, A., & Nandi, C. K. (2022). Structural and spectroscopic characterization of pyrene derived carbon nano dots: a single-particle level analysis. Nanoscale, 14(9), 3568–3578. https://doi.org/10.1039/d1nr07190d

2D Materials / Dec 01, 2020

McCreary, A., Kazakova, O., Jariwala, D., & Al Balushi, Z. Y. (2020). An outlook into the flat land of 2D materials beyond graphene: synthesis, properties and device applications. 2D Materials, 8(1), 013001. https://doi.org/10.1088/2053-1583/abc13d

ACS Photonics / Jul 13, 2021

Chowdhury, T., Jo, K., Anantharaman, S. B., Brintlinger, T. H., Jariwala, D., & Kempa, T. J. (2021). Anomalous Room-Temperature Photoluminescence from Nanostrained MoSe2 Monolayers. ACS Photonics, 8(8), 2220–2226. https://doi.org/10.1021/acsphotonics.1c00640

ACS Materials Letters / Dec 22, 2020

Song, B., Hou, J., Wang, H., Sidhik, S., Miao, J., Gu, H., Zhang, H., Liu, S., Fakhraai, Z., Even, J., Blancon, J.-C., Mohite, A. D., & Jariwala, D. (2020). Determination of Dielectric Functions and Exciton Oscillator Strength of Two-Dimensional Hybrid Perovskites. ACS Materials Letters, 3(1), 148–159. https://doi.org/10.1021/acsmaterialslett.0c00505

ACS Nano / Mar 08, 2021

Jo, K., Kumar, P., Orr, J., Anantharaman, S. B., Miao, J., Motala, M. J., Bandyopadhyay, A., Kisslinger, K., Muratore, C., Shenoy, V. B., Stach, E. A., Glavin, N. R., & Jariwala, D. (2021). Direct Optoelectronic Imaging of 2D Semiconductor–3D Metal Buried Interfaces. ACS Nano, 15(3), 5618–5630. https://doi.org/10.1021/acsnano.1c00708

Journal of Vacuum Science &amp; Technology A / May 01, 2021

Kumar, P., Figueroa, K. S., Foucher, A. C., Jo, K., Acero, N., Stach, E. A., & Jariwala, D. (2021). Efficacy of boron nitride encapsulation against plasma-processing of 2D semiconductor layers. Journal of Vacuum Science &amp; Technology A, 39(3), 032201. https://doi.org/10.1116/6.0000874

Materials Today / May 01, 2021

Kumbhakar, P., Chowde Gowda, C., Mahapatra, P. L., Mukherjee, M., Malviya, K. D., Chaker, M., Chandra, A., Lahiri, B., Ajayan, P. M., Jariwala, D., Singh, A., & Tiwary, C. S. (2021). Emerging 2D metal oxides and their applications. Materials Today, 45, 142–168. https://doi.org/10.1016/j.mattod.2020.11.023

ACS Nano / Jul 26, 2021

Anantharaman, S. B., Jo, K., & Jariwala, D. (2021). Exciton–Photonics: From Fundamental Science to Applications. ACS Nano, 15(8), 12628–12654. https://doi.org/10.1021/acsnano.1c02204

Nano Letters / Mar 24, 2021

Lan, H.-Y., Hsieh, Y.-H., Chiao, Z.-Y., Jariwala, D., Shih, M.-H., Yen, T.-J., Hess, O., & Lu, Y.-J. (2021). Gate-Tunable Plasmon-Enhanced Photodetection in a Monolayer MoS2 Phototransistor with Ultrahigh Photoresponsivity. Nano Letters, 21(7), 3083–3091. https://doi.org/10.1021/acs.nanolett.1c00271

ACS Nano / May 18, 2021

Serra-Maia, R., Kumar, P., Meng, A. C., Foucher, A. C., Kang, Y., Karki, K., Jariwala, D., & Stach, E. A. (2021). Nanoscale Chemical and Structural Analysis during In Situ Scanning/Transmission Electron Microscopy in Liquids. ACS Nano, 15(6), 10228–10240. https://doi.org/10.1021/acsnano.1c02340

Nano Letters / Apr 21, 2021

Liu, X., Wang, D., Kim, K.-H., Katti, K., Zheng, J., Musavigharavi, P., Miao, J., Stach, E. A., Olsson, R. H., & Jariwala, D. (2021). Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor Memory. Nano Letters, 21(9), 3753–3761. https://doi.org/10.1021/acs.nanolett.0c05051

Nanotechnology / Oct 20, 2020

Berggren, K., Xia, Q., Likharev, K. K., Strukov, D. B., Jiang, H., Mikolajick, T., Querlioz, D., Salinga, M., Erickson, J. R., Pi, S., Xiong, F., Lin, P., Li, C., Chen, Y., Xiong, S., Hoskins, B. D., Daniels, M. W., Madhavan, A., Liddle, J. A., … Raychowdhury, A. (2020). Roadmap on emerging hardware and technology for machine learning. Nanotechnology, 32(1), 012002. https://doi.org/10.1088/1361-6528/aba70f

Nano Letters / Jul 14, 2021

Anantharaman, S. B., Stevens, C. E., Lynch, J., Song, B., Hou, J., Zhang, H., Jo, K., Kumar, P., Blancon, J.-C., Mohite, A. D., Hendrickson, J. R., & Jariwala, D. (2021). Self-Hybridized Polaritonic Emission from Layered Perovskites. Nano Letters, 21(14), 6245–6252. https://doi.org/10.1021/acs.nanolett.1c02058

Nano Letters / Jun 21, 2021

Wong, J., Davoyan, A., Liao, B., Krayev, A., Jo, K., Rotenberg, E., Bostwick, A., Jozwiak, C. M., Jariwala, D., Zewail, A. H., & Atwater, H. A. (2021). Spatiotemporal Imaging of Thickness-Induced Band-Bending Junctions. Nano Letters, 21(13), 5745–5753. https://doi.org/10.1021/acs.nanolett.1c01481

physica status solidi (RRL) – Rapid Research Letters / Mar 05, 2021

Wang, D., Musavigharavi, P., Zheng, J., Esteves, G., Liu, X., Fiagbenu, M. M. A., Stach, E. A., Jariwala, D., & Olsson, R. H. (2021). Sub‐Microsecond Polarization Switching in (Al,Sc)N Ferroelectric Capacitors Grown on Complementary Metal–Oxide–Semiconductor‐Compatible Aluminum Electrodes. Physica Status Solidi (RRL) – Rapid Research Letters, 15(5), 2000575. Portico. https://doi.org/10.1002/pssr.202000575

The Journal of Physical Chemistry C / Sep 14, 2020

Lin, Y.-R., Cheng, W.-H., Richter, M. H., DuChene, J. S., Peterson, E. A., Went, C. M., Al Balushi, Z. Y., Jariwala, D., Neaton, J. B., Chen, L.-C., & Atwater, H. A. (2020). Band Edge Tailoring in Few-Layer Two-Dimensional Molybdenum Sulfide/Selenide Alloys. The Journal of Physical Chemistry C, 124(42), 22893–22902. https://doi.org/10.1021/acs.jpcc.0c04719

npj 2D Materials and Applications / Jun 12, 2020

Kumar, P., Horwath, J. P., Foucher, A. C., Price, C. C., Acero, N., Shenoy, V. B., Stach, E. A., & Jariwala, D. (2020). Direct visualization of out-of-equilibrium structural transformations in atomically thin chalcogenides. Npj 2D Materials and Applications, 4(1). https://doi.org/10.1038/s41699-020-0150-2

Nano Letters / Mar 20, 2020

Miao, J., Liu, X., Jo, K., He, K., Saxena, R., Song, B., Zhang, H., He, J., Han, M.-G., Hu, W., & Jariwala, D. (2020). Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces. Nano Letters, 20(4), 2907–2915. https://doi.org/10.1021/acs.nanolett.0c00741

ACS Photonics / Sep 23, 2020

Song, B., Liu, F., Wang, H., Miao, J., Chen, Y., Kumar, P., Zhang, H., Liu, X., Gu, H., Stach, E. A., Liang, X., Liu, S., Fakhraai, Z., & Jariwala, D. (2020). Giant Gate-Tunability of Complex Refractive Index in Semiconducting Carbon Nanotubes. ACS Photonics, 7(10), 2896–2905. https://doi.org/10.1021/acsphotonics.0c01220

Nano Letters / Dec 05, 2019

Brown, K. A., Brittman, S., Maccaferri, N., Jariwala, D., & Celano, U. (2019). Machine Learning in Nanoscience: Big Data at Small Scales. Nano Letters, 20(1), 2–10. https://doi.org/10.1021/acs.nanolett.9b04090

ACS Nano / Sep 08, 2020

Frey, N. C., Akinwande, D., Jariwala, D., & Shenoy, V. B. (2020). Machine Learning-Enabled Design of Point Defects in 2D Materials for Quantum and Neuromorphic Information Processing. ACS Nano, 14(10), 13406–13417. https://doi.org/10.1021/acsnano.0c05267

Nano Letters / Jul 27, 2020

Maccaferri, N., Meuret, S., Kornienko, N., & Jariwala, D. (2020). Speeding up Nanoscience and Nanotechnology with Ultrafast Plasmonics. Nano Letters, 20(8), 5593–5596. https://doi.org/10.1021/acs.nanolett.0c02452

Nature Nanotechnology / Nov 18, 2019

Chowdhury, T., Kim, J., Sadler, E. C., Li, C., Lee, S. W., Jo, K., Xu, W., Gracias, D. H., Drichko, N. V., Jariwala, D., Brintlinger, T. H., Mueller, T., Park, H.-G., & Kempa, T. J. (2019). Substrate-directed synthesis of MoS2 nanocrystals with tunable dimensionality and optical properties. Nature Nanotechnology, 15(1), 29–34. https://doi.org/10.1038/s41565-019-0571-2

npj 2D Materials and Applications / Dec 01, 2020

Moore, D., Jo, K., Nguyen, C., Lou, J., Muratore, C., Jariwala, D., & Glavin, N. R. (2020). Uncovering topographically hidden features in 2D MoSe2 with correlated potential and optical nanoprobes. Npj 2D Materials and Applications, 4(1). https://doi.org/10.1038/s41699-020-00178-w

Molecular Systems Design &amp; Engineering / Jan 01, 2019

Jariwala, D., & Hersam, M. C. (2019). 2D materials: molecular design and engineering perspectives. Molecular Systems Design &amp; Engineering, 4(3), 469–470. https://doi.org/10.1039/c9me90017a

Nano Letters / Dec 07, 2018

Sherrott, M. C., Whitney, W. S., Jariwala, D., Biswas, S., Went, C. M., Wong, J., Rossman, G. R., & Atwater, H. A. (2018). Anisotropic Quantum Well Electro-Optics in Few-Layer Black Phosphorus. Nano Letters, 19(1), 269–276. https://doi.org/10.1021/acs.nanolett.8b03876

ACS Applied Materials &amp; Interfaces / Sep 12, 2019

Krayev, A., Bailey, C. S., Jo, K., Wang, S., Singh, A., Darlington, T., Liu, G.-Y., Gradecak, S., Schuck, P. J., Pop, E., & Jariwala, D. (2019). Dry Transfer of van der Waals Crystals to Noble Metal Surfaces To Enable Characterization of Buried Interfaces. ACS Applied Materials &amp; Interfaces, 11(41), 38218–38225. https://doi.org/10.1021/acsami.9b09798

Nano Letters / Oct 09, 2019

Bandyopadhyay, A., Frey, N. C., Jariwala, D., & Shenoy, V. B. (2019). Engineering Magnetic Phases in Two-Dimensional Non-van der Waals Transition-Metal Oxides. Nano Letters, 19(11), 7793–7800. https://doi.org/10.1021/acs.nanolett.9b02801

ACS Nano / Jun 21, 2019

Price, C. C., Frey, N. C., Jariwala, D., & Shenoy, V. B. (2019). Engineering Zero-Dimensional Quantum Confinement in Transition-Metal Dichalcogenide Heterostructures. ACS Nano, 13(7), 8303–8311. https://doi.org/10.1021/acsnano.9b03716

Nano Letters / Jun 24, 2019

Yang, A., Blancon, J.-C., Jiang, W., Zhang, H., Wong, J., Yan, E., Lin, Y.-R., Crochet, J., Kanatzidis, M. G., Jariwala, D., Low, T., Mohite, A. D., & Atwater, H. A. (2019). Giant Enhancement of Photoluminescence Emission in WS2-Two-Dimensional Perovskite Heterostructures. Nano Letters, 19(8), 4852–4860. https://doi.org/10.1021/acs.nanolett.8b05105

Nano Letters / Oct 29, 2019

Han, M.-G., Garlow, J. A., Liu, Y., Zhang, H., Li, J., DiMarzio, D., Knight, M. W., Petrovic, C., Jariwala, D., & Zhu, Y. (2019). Topological Magnetic-Spin Textures in Two-Dimensional van der Waals Cr2Ge2Te6. Nano Letters, 19(11), 7859–7865. https://doi.org/10.1021/acs.nanolett.9b02849

npj 2D Materials and Applications / Jul 16, 2018

Stanford, M. G., Rack, P. D., & Jariwala, D. (2018). Emerging nanofabrication and quantum confinement techniques for 2D materials beyond graphene. Npj 2D Materials and Applications, 2(1). https://doi.org/10.1038/s41699-018-0065-3

Nature Materials / May 07, 2018

Atwater, H. A., Davoyan, A. R., Ilic, O., Jariwala, D., Sherrott, M. C., Went, C. M., Whitney, W. S., & Wong, J. (2018). Materials challenges for the Starshot lightsail. Nature Materials, 17(10), 861–867. https://doi.org/10.1038/s41563-018-0075-8

Nature Materials / Aug 16, 2018

Atwater, H. A., Davoyan, A. R., Ilic, O., Jariwala, D., Sherrott, M. C., Went, C. M., Whitney, W. S., & Wong, J. (2018). Publisher Correction: Materials challenges for the Starshot lightsail. Nature Materials, 17(10), 943–943. https://doi.org/10.1038/s41563-018-0160-z

Nature Materials / Oct 12, 2018

Atwater, H. A., Davoyan, A. R., Ilic, O., Jariwala, D., Sherrott, M. C., Went, C. M., Whitney, W. S., & Wong, J. (2018). Publisher Correction: Materials challenges for the Starshot lightsail. Nature Materials, 17(12), 1164–1164. https://doi.org/10.1038/s41563-018-0214-2

2D Materials / Apr 10, 2018

Jariwala, D., Krayev, A., Wong, J., Robinson, A. E., Sherrott, M. C., Wang, S., Liu, G.-Y., Terrones, M., & Atwater, H. A. (2018). Nanoscale doping heterogeneity in few-layer WSe 2 exfoliated onto noble metals revealed by correlated SPM and TERS imaging. 2D Materials, 5(3), 035003. https://doi.org/10.1088/2053-1583/aab7bc

Nature Nanotechnology / Jan 12, 2018

Jariwala, D. (2018). Tunable confinement of charges and excitations. Nature Nanotechnology, 13(2), 99–100. https://doi.org/10.1038/s41565-017-0047-1

Chemistry of Materials / May 24, 2017

Lin, W.-H., Brar, V. W., Jariwala, D., Sherrott, M. C., Tseng, W.-S., Wu, C.-I., Yeh, N.-C., & Atwater, H. A. (2017). Atomic-Scale Structural and Chemical Characterization of Hexagonal Boron Nitride Layers Synthesized at the Wafer-Scale with Monolayer Thickness Control. Chemistry of Materials, 29(11), 4700–4707. https://doi.org/10.1021/acs.chemmater.7b00183

Nano Letters / Dec 27, 2016

Whitney, W. S., Sherrott, M. C., Jariwala, D., Lin, W.-H., Bechtel, H. A., Rossman, G. R., & Atwater, H. A. (2016). Field Effect Optoelectronic Modulation of Quantum-Confined Carriers in Black Phosphorus. Nano Letters, 17(1), 78–84. https://doi.org/10.1021/acs.nanolett.6b03362

ACS Nano / Jun 07, 2017

Wong, J., Jariwala, D., Tagliabue, G., Tat, K., Davoyan, A. R., Sherrott, M. C., & Atwater, H. A. (2017). High Photovoltaic Quantum Efficiency in Ultrathin van der Waals Heterostructures. ACS Nano, 11(7), 7230–7240. https://doi.org/10.1021/acsnano.7b03148

Chemistry of Materials / Apr 28, 2017

Choi, Y., Kang, J., Jariwala, D., Wells, S. A., Kang, M. S., Marks, T. J., Hersam, M. C., & Cho, J. H. (2017). Low-Voltage 2D Material Field-Effect Transistors Enabled by Ion Gel Capacitive Coupling. Chemistry of Materials, 29(9), 4008–4013. https://doi.org/10.1021/acs.chemmater.7b00573

Nature Materials / Aug 01, 2016

Jariwala, D., Marks, T. J., & Hersam, M. C. (2016). Mixed-dimensional van der Waals heterostructures. Nature Materials, 16(2), 170–181. https://doi.org/10.1038/nmat4703

ACS Photonics / Nov 01, 2017

Jariwala, D., Davoyan, A. R., Wong, J., & Atwater, H. A. (2017). Van der Waals Materials for Atomically-Thin Photovoltaics: Promise and Outlook. ACS Photonics, 4(12), 2962–2970. https://doi.org/10.1021/acsphotonics.7b01103

Nano Letters / Dec 18, 2015

Jariwala, D., Howell, S. L., Chen, K.-S., Kang, J., Sangwan, V. K., Filippone, S. A., Turrisi, R., Marks, T. J., Lauhon, L. J., & Hersam, M. C. (2015). Hybrid, Gate-Tunable, van der Waals p–n Heterojunctions from Pentacene and MoS2. Nano Letters, 16(1), 497–503. https://doi.org/10.1021/acs.nanolett.5b04141

Advanced Materials / Oct 30, 2015

Zhu, J., Liu, X., Geier, M. L., McMorrow, J. J., Jariwala, D., Beck, M. E., Huang, W., Marks, T. J., & Hersam, M. C. (2015). Layer-by-Layer Assembled 2D Montmorillonite Dielectrics for Solution-Processed Electronics. Advanced Materials, 28(1), 63–68. Portico. https://doi.org/10.1002/adma.201504501

Advanced Materials / May 01, 2016

Choi, Y., Kang, J., Jariwala, D., Kang, M. S., Marks, T. J., Hersam, M. C., & Cho, J. H. (2016). Low‐Voltage Complementary Electronics from Ion‐Gel‐Gated Vertical Van der Waals Heterostructures. Advanced Materials, 28(19), 3742–3748. Portico. https://doi.org/10.1002/adma.201506450

Nano Letters / Aug 31, 2016

Jariwala, D., Davoyan, A. R., Tagliabue, G., Sherrott, M. C., Wong, J., & Atwater, H. A. (2016). Near-Unity Absorption in van der Waals Semiconductors for Ultrathin Optoelectronics. Nano Letters, 16(9), 5482–5487. https://doi.org/10.1021/acs.nanolett.6b01914

Nano Letters / Mar 09, 2016

Kang, J., Jariwala, D., Ryder, C. R., Wells, S. A., Choi, Y., Hwang, E., Cho, J. H., Marks, T. J., & Hersam, M. C. (2016). Probing Out-of-Plane Charge Transport in Black Phosphorus with Graphene-Contacted Vertical Field-Effect Transistors. Nano Letters, 16(4), 2580–2585. https://doi.org/10.1021/acs.nanolett.6b00144

Nature Nanotechnology / Apr 06, 2015

Sangwan, V. K., Jariwala, D., Kim, I. S., Chen, K.-S., Marks, T. J., Lauhon, L. J., & Hersam, M. C. (2015). Gate-tunable memristive phenomena mediated by grain boundaries in single-layer MoS2. Nature Nanotechnology, 10(5), 403–406. https://doi.org/10.1038/nnano.2015.56

Nano Letters / Mar 30, 2015

Howell, S. L., Jariwala, D., Wu, C.-C., Chen, K.-S., Sangwan, V. K., Kang, J., Marks, T. J., Hersam, M. C., & Lauhon, L. J. (2015). Investigation of Band-Offsets at Monolayer–Multilayer MoS2 Junctions by Scanning Photocurrent Microscopy. Nano Letters, 15(4), 2278–2284. https://doi.org/10.1021/nl504311p

Nano Letters / Dec 03, 2014

Jariwala, D., Sangwan, V. K., Seo, J.-W. T., Xu, W., Smith, J., Kim, C. H., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2014). Large-Area, Low-Voltage, Antiambipolar Heterojunctions from Solution-Processed Semiconductors. Nano Letters, 15(1), 416–421. https://doi.org/10.1021/nl5037484

Nano Letters / Sep 10, 2015

Zhu, J., Kang, J., Kang, J., Jariwala, D., Wood, J. D., Seo, J.-W. T., Chen, K.-S., Marks, T. J., & Hersam, M. C. (2015). Solution-Processed Dielectrics Based on Thickness-Sorted Two-Dimensional Hexagonal Boron Nitride Nanosheets. Nano Letters, 15(10), 7029–7036. https://doi.org/10.1021/acs.nanolett.5b03075

ACS Applied Materials &amp; Interfaces / Nov 24, 2015

McMorrow, J. J., Walker, A. R., Sangwan, V. K., Jariwala, D., Hoffman, E., Everaerts, K., Facchetti, A., Hersam, M. C., & Marks, T. J. (2015). Solution-Processed Self-Assembled Nanodielectrics on Template-Stripped Metal Substrates. ACS Applied Materials &amp; Interfaces, 7(48), 26360–26366. https://doi.org/10.1021/acsami.5b07744

Nano Letters / Nov 12, 2014

Wood, J. D., Wells, S. A., Jariwala, D., Chen, K.-S., Cho, E., Sangwan, V. K., Liu, X., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2014). Effective Passivation of Exfoliated Black Phosphorus Transistors against Ambient Degradation. Nano Letters, 14(12), 6964–6970. https://doi.org/10.1021/nl5032293

ACS Nano / Jan 31, 2014

Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2014). Emerging Device Applications for Semiconducting Two-Dimensional Transition Metal Dichalcogenides. ACS Nano, 8(2), 1102–1120. https://doi.org/10.1021/nn500064s

ACS Nano / Sep 22, 2014

Kim, I. S., Sangwan, V. K., Jariwala, D., Wood, J. D., Park, S., Chen, K.-S., Shi, F., Ruiz-Zepeda, F., Ponce, A., Jose-Yacaman, M., Dravid, V. P., Marks, T. J., Hersam, M. C., & Lauhon, L. J. (2014). Influence of Stoichiometry on the Optical and Electrical Properties of Chemical Vapor Deposition Derived MoS2. ACS Nano, 8(10), 10551–10558. https://doi.org/10.1021/nn503988x

The Journal of Physical Chemistry Letters / Jul 19, 2013

Wu, C.-C., Jariwala, D., Sangwan, V. K., Marks, T. J., Hersam, M. C., & Lauhon, L. J. (2013). Elucidating the Photoresponse of Ultrathin MoS2 Field-Effect Transistors by Scanning Photocurrent Microscopy. The Journal of Physical Chemistry Letters, 4(15), 2508–2513. https://doi.org/10.1021/jz401199x

ACS Nano / Dec 24, 2012

Behnam, A., Sangwan, V. K., Zhong, X., Lian, F., Estrada, D., Jariwala, D., Hoag, A. J., Lauhon, L. J., Marks, T. J., Hersam, M. C., & Pop, E. (2012). High-Field Transport and Thermal Reliability of Sorted Carbon Nanotube Network Devices. ACS Nano, 7(1), 482–490. https://doi.org/10.1021/nn304570u

Nano Letters / Aug 19, 2013

Sangwan, V. K., Arnold, H. N., Jariwala, D., Marks, T. J., Lauhon, L. J., & Hersam, M. C. (2013). Low-Frequency Electronic Noise in Single-Layer MoS2 Transistors. Nano Letters, 13(9), 4351–4355. https://doi.org/10.1021/nl402150r

ACS Applied Materials &amp; Interfaces / Nov 18, 2013

Everaerts, K., Zeng, L., Hennek, J. W., Camacho, D. I., Jariwala, D., Bedzyk, M. J., Hersam, M. C., & Marks, T. J. (2013). Printed Indium Gallium Zinc Oxide Transistors. Self-Assembled Nanodielectric Effects on Low-Temperature Combustion Growth and Carrier Mobility. ACS Applied Materials &amp; Interfaces, 5(22), 11884–11893. https://doi.org/10.1021/am403585n

Nano Letters / Feb 08, 2013

Sangwan, V. K., Jariwala, D., Filippone, S. A., Karmel, H. J., Johns, J. E., Alaboson, J. M. P., Marks, T. J., Lauhon, L. J., & Hersam, M. C. (2013). Quantitatively Enhanced Reliability and Uniformity of High-κ Dielectrics on Graphene Enabled by Self-Assembled Seeding Layers. Nano Letters, 13(3), 1162–1167. https://doi.org/10.1021/nl3045553

Physical Review B / Aug 13, 2012

Song, L., Balicas, L., Mowbray, D. J., Capaz, R. B., Storr, K., Ci, L., Jariwala, D., Kurth, S., Louie, S. G., Rubio, A., & Ajayan, P. M. (2012). Anomalous insulator-metal transition in boron nitride-graphene hybrid atomic layers. Physical Review B, 86(7). https://doi.org/10.1103/physrevb.86.075429

Journal of Nanoscience and Nanotechnology / Aug 01, 2011

Jariwala, D., Srivastava, A., & Ajayan, P. M. (2011). Graphene Synthesis and Band Gap Opening. Journal of Nanoscience and Nanotechnology, 11(8), 6621–6641. https://doi.org/10.1166/jnn.2011.5001

Nanoscale / Jan 01, 2011

Parashar, U. K., Bhandari, S., Srivastava, R. K., Jariwala, D., & Srivastava, A. (2011). Single step synthesis of graphene nanoribbons by catalyst particle size dependent cutting of multiwalled carbon nanotubes. Nanoscale, 3(9), 3876. https://doi.org/10.1039/c1nr10483g

Nature Materials / Feb 28, 2010

Ci, L., Song, L., Jin, C., Jariwala, D., Wu, D., Li, Y., Srivastava, A., Wang, Z. F., Storr, K., Balicas, L., Liu, F., & Ajayan, P. M. (2010). Atomic layers of hybridized boron nitride and graphene domains. Nature Materials, 9(5), 430–435. https://doi.org/10.1038/nmat2711

Chemistry of Materials / May 14, 2010

Srivastava, A., Galande, C., Ci, L., Song, L., Rai, C., Jariwala, D., Kelly, K. F., & Ajayan, P. M. (2010). Novel Liquid Precursor-Based Facile Synthesis of Large-Area Continuous, Single, and Few-Layer Graphene Films. Chemistry of Materials, 22(11), 3457–3461. https://doi.org/10.1021/cm101027c

Advanced Materials / Nov 26, 2009

Ci, L., Song, L., Jariwala, D., Elías, A. L., Gao, W., Terrones, M., & Ajayan, P. M. (2009). Graphene Shape Control by Multistage Cutting and Transfer. Advanced Materials, 21(44), 4487–4491. https://doi.org/10.1002/adma.200900942

Physical Review Materials / Jun 28, 2019

Lamichhane, T. N., Rana, K., Lin, Q., Bud’ko, S. L., Furukawa, Y., & Canfield, P. C. (2019). Near room temperature antiferromagnetic ordering with a potential low-dimensional magnetism in <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi>AlMn</mml:mi><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">B</mml:mi><mml:mn>2</mml:mn></mml:msub></mml:mrow></mml:math>. Physical Review Materials, 3(6). https://doi.org/10.1103/physrevmaterials.3.064415

Materials / Jul 26, 2020

Paranthaman, M. P., Yildirim, V., Lamichhane, T. N., Begley, B. A., Post, B. K., Hassen, A. A., Sales, B. C., Gandha, K., & Nlebedim, I. C. (2020). Additive Manufacturing of Isotropic NdFeB PPS Bonded Permanent Magnets. Materials, 13(15), 3319. https://doi.org/10.3390/ma13153319

JOM / Feb 22, 2022

Cui, J., Ormerod, J., Parker, D. S., Ott, R., Palasyuk, A., McCall, S., Paranthaman, M. P., Kesler, M. S., McGuire, M. A., Nlebedim, C., Pan, C., & Lograsso, T. (2022). Manufacturing Processes for Permanent Magnets: Part II—Bonding and Emerging Methods. JOM, 74(6), 2492–2506. https://doi.org/10.1007/s11837-022-05188-1

JOM / Feb 02, 2022

Cui, J., Ormerod, J., Parker, D., Ott, R., Palasyuk, A., Mccall, S., Paranthaman, M. P., Kesler, M. S., McGuire, M. A., Nlebedim, I. C., Pan, C., & Lograsso, T. (2022). Manufacturing Processes for Permanent Magnets: Part I—Sintering and Casting. JOM, 74(4), 1279–1295. https://doi.org/10.1007/s11837-022-05156-9

Additive Manufacturing / May 01, 2018

Li, L., Jones, K., Sales, B., Pries, J. L., Nlebedim, I. C., Jin, K., Bei, H., Post, B. K., Kesler, M. S., Rios, O., Kunc, V., Fredette, R., Ormerod, J., Williams, A., Lograsso, T. A., & Paranthaman, M. P. (2018). Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing. Additive Manufacturing, 21, 495–500. https://doi.org/10.1016/j.addma.2018.04.001

Advanced Electronic Materials / Apr 10, 2017

Cao, C., Andrews, J. B., & Franklin, A. D. (2017). Completely Printed, Flexible, Stable, and Hysteresis-Free Carbon Nanotube Thin-Film Transistors via Aerosol Jet Printing. Advanced Electronic Materials, 3(5), 1700057. Portico. https://doi.org/10.1002/aelm.201700057

ACS Nano / Apr 20, 2016

Cao, C., Andrews, J. B., Kumar, A., & Franklin, A. D. (2016). Improving Contact Interfaces in Fully Printed Carbon Nanotube Thin-Film Transistors. ACS Nano, 10(5), 5221–5229. https://doi.org/10.1021/acsnano.6b00877

ACS Nano / Oct 03, 2019

Lu, S., Cardenas, J. A., Worsley, R., Williams, N. X., Andrews, J. B., Casiraghi, C., & Franklin, A. D. (2019). Flexible, Print-in-Place 1D–2D Thin-Film Transistors Using Aerosol Jet Printing. ACS Nano, 13(10), 11263–11272. https://doi.org/10.1021/acsnano.9b04337

ACS Nano / May 09, 2018

Andrews, J. B., Mondal, K., Neumann, T. V., Cardenas, J. A., Wang, J., Parekh, D. P., Lin, Y., Ballentine, P., Dickey, M. D., & Franklin, A. D. (2018). Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors. ACS Nano, 12(6), 5482–5488. https://doi.org/10.1021/acsnano.8b00909

Nano Futures / Jan 10, 2020

Cardenas, J. A., Andrews, J. B., Noyce, S. G., & Franklin, A. D. (2020). Carbon nanotube electronics for IoT sensors. Nano Futures, 4(1), 012001. https://doi.org/10.1088/2399-1984/ab5f20

Macromolecular Symposia / Apr 01, 2022

Goyal, D., Saikia, H., Hada, R., Katara, S., Bhatia, A., & Malpani, S. K. (2022). Perlite Supported Cobalt Oxide Catalyst for a Series of Liquid‐Phase Esterification Reactions. Macromolecular Symposia, 402(1), 2100369. Portico. https://doi.org/10.1002/masy.202100369

Chemical Papers / Feb 15, 2021

Malpani, S. K., Goyal, D., Katara, S., & Rani, A. (2021). Green, efficient and economical coal fly ash based phosphomolybdic acid catalysts: preparation, characterization and application. Chemical Papers, 75(7), 3017–3034. https://doi.org/10.1007/s11696-020-01501-x

Sensors and Actuators A: Physical / Oct 01, 2012

Horowitz, S. B., Mathias, A. D., Fox, J. R., Cortes, J. P., Sanghadasa, M., & Ashley, P. (2012). Effects of scaling and geometry on the performance of piezoelectric microphones. Sensors and Actuators A: Physical, 185, 24–32. https://doi.org/10.1016/j.sna.2012.07.008

Journal of Micromechanics and Microengineering / Aug 09, 2006

Horowitz, S. B., Sheplak, M., Cattafesta, L. N., & Nishida, T. (2006). A MEMS acoustic energy harvester. Journal of Micromechanics and Microengineering, 16(9), S174–S181. https://doi.org/10.1088/0960-1317/16/9/s02

Cell Reports Physical Science / Oct 01, 2022

Lu, Z., Leroy, A., Zhang, L., Patil, J. J., Wang, E. N., & Grossman, J. C. (2022). Significantly enhanced sub-ambient passive cooling enabled by evaporation, radiation, and insulation. Cell Reports Physical Science, 3(10), 101068. https://doi.org/10.1016/j.xcrp.2022.101068

Journal of Heat Transfer / May 24, 2022

Vaartstra, G., Lu, Z., Lienhard, J. H., & Wang, E. N. (2022). Revisiting the Schrage Equation for Kinetically Limited Evaporation and Condensation. Journal of Heat Transfer, 144(8). https://doi.org/10.1115/1.4054382

Langmuir / Mar 29, 2022

Iwata, R., Zhang, L., Lu, Z., Gong, S., Du, J., & Wang, E. N. (2022). How Coalescing Bubbles Depart from a Wall. Langmuir, 38(14), 4371–4377. https://doi.org/10.1021/acs.langmuir.2c00118

Journal of The Electrochemical Society / Mar 01, 2022

Wild, J., Wang, P., Jin, T., & Yang, Y. (2022). Modeling Isotope Separation in Electrochemical Lithium Deposition. Journal of The Electrochemical Society, 169(3), 032504. https://doi.org/10.1149/1945-7111/ac5854

Journal of The Electrochemical Society / Nov 01, 2021

Xu, T., Chen, C., Jin, T., Lou, S., Zhang, R., Xiao, X., Huang, X., & Yang, Y. (2021). Chemical Heterogeneity in PAN/LLZTO Composite Electrolytes by Synchrotron Imaging. Journal of The Electrochemical Society, 168(11), 110522. https://doi.org/10.1149/1945-7111/ac352a

Nature Materials / Apr 01, 2021

Russell, J. C., Posey, V. A., Gray, J., May, R., Reed, D. A., Zhang, H., Marbella, L. E., Steigerwald, M. L., Yang, Y., Roy, X., Nuckolls, C., & Peurifoy, S. R. (2021). High-performance organic pseudocapacitors via molecular contortion. Nature Materials, 20(8), 1136–1141. https://doi.org/10.1038/s41563-021-00954-z

Advanced Energy Materials / May 28, 2021

Jin, T., Ma, Y., Xiong, Z., Fan, X., Luo, Y., Hui, Z., Chen, X., & Yang, Y. (2021). Bioinspired, Tree‐Root‐Like Interfacial Designs for Structural Batteries with Enhanced Mechanical Properties. Advanced Energy Materials, 11(25), 2100997. Portico. https://doi.org/10.1002/aenm.202100997

Advanced Functional Materials